[sane-devel] Re: Getting Mustek 1200 UB Plus scanner working

[Martin]

Followup # 1:
-----------------
I have sane-backends-1.0.16 installed.

For my RedHat 9 system the output of /proc/version , is,
Linux version 2.4.20-31.9 (bhcompile at daffy.perf.redhat.com) (gcc version 
3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Tue Apr 13 17:38:41 EDT 2004

 >> SANE uses libusb and that library looks at all USB devices connected
 >> to the system. Devices are usually located in /proc/bus/usb/ . This
 >> file system must be mounted (see man sane-usb).

I added this line to, /etc/fstab,
none /proc/bus/usb usbfs defaults 0 0


Followup # 2:
------------------
 >> The scanner module is not needed anymore. You just need kernel USB 
support.
 >> What's the output of "cat /proc/bus/usb/devices" and 
"sane-find-scanner -v -v"?

The output of cat /proc/bus/usb/devices, is,

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms


The output of, sane-find-scanner -v , is,

... failed to open (Invalid argument)

for all /dev/scanner??

BTW, the output of /proc/bus/usb/drivers is,
usbdevfs
hub
96-111: hiddev
hid


Folowup #3:
----------------
 >> SANE uses libusb and that library looks at all USB devices connected
 >> to the system. Devices are usually located in /proc/bus/usb/ . This
 >> file system must be mounted (see man sane-usb).

How can I verify that the kernel is configured for USB suport, and that 
the devices are mounted?

If not, what do I need to do, to make it so?

Again thank you for your patience, I'll get my Mustek scanner working 
yet - I'm determined to do so!
-Martin