[sane-devel] BenQ 5000

[Gerhard Jaeger]

On Wednesday 09 February 2005 13:39, Vitaly Lipatov wrote:
> I try to get work Benq 5000 scanner, but it does not work:
> # scanimage -L
> device `snapscan:libusb:001:002' is a Acer FlatbedScanner22 
> flatbed scanner
> [root@server tmp]# scanimage >some.out
> [snapscan] Scanner warming up - waiting 32 seconds.
> scanimage: open of device snapscan:libusb:001:002 failed: Error 
> during device I/O
> 
> It turn on lamp and moving for two seconds, after it failed with 
> the error.
> 
> I use firmware 20F8v115.bin from CD.
> 
> Info from proc:
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=12  MxCh= 0
> D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
> P:  Vendor=04a5 ProdID=20f8 Rev= 1.20
> S:  Manufacturer=Color
> S:  Product= FlatbedScanner 22
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff 
> Driver=usbscanner
> 
Guess you should unload the scanner module... 
Are you using 2.4 kernel or a early 2.6? Blacklist the scanner module...

Gerhard