[sane-devel] Nikon LS-1000 breaks on 0.92 and later???
Bob Hepple
bhepple@freeshell.org
Sat, 8 Jan 2005 18:39:08 +1000
--Signature=_Sat__8_Jan_2005_18_39_08_+1000_ETl.WOxDtaT.IcA7
Content-Type: text/plain; charset=US-ASCII
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
G'day from sunny Brisbane ....
I recently upgraded to xsane 0.95 (from 0.91) and and sane-backends-1.0.14
(from 1.0.11) and since then I can't use my Nikon LS-1000 scsi scanner
with xsane - and I can't get back to versions 0.91 / 1.0.11!!!!
The problem is that after the scanner selection dialog I get a popup
window saying "Error obtaining option count".
Any ideas? Here's what I know:
The other scsi scanner (Umax Astra 610S) continues to work fine with all versions of xsane.
I deleted the ~/.sane/xsane/xsane.rc file as instructed.
'scanimage' on the Nikon LS-1000 works fine.
I tried 0.96-rc1 (gentoo release candidate 1) and 0.93 and
sane-backends-1.0.14 and 1.0.15 and I get the same problem.
When I run with SANE_DEBUG_COOLSCAN=128 I get:
[sanei_debug] Setting debug level of coolscan to 128.
[coolscan] sane_init
[coolscan] attach_scanner: /dev/sg2
[coolscan] attach_scanner: opening /dev/sg2
[coolscan] identify_scanner
[coolscan] do_inquiry
[coolscan]
[coolscan] 000: 12 00 00 00 24 00
[coolscan] sanei_scsi_cmd: returning 36 bytes:
[coolscan]
[coolscan] 000: 06 00 02 02 1f 00 00 00 4e 69 6b 6f 6e 20 20 20
[coolscan] 016: 4c 53 2d 31 30 30 30 20 20 20 20 20 20 20 20 20
[coolscan] 032: 31 2e 30 36
[coolscan] get_inquiry_values
[coolscan] Found Nikon scanner LS-1000 version 1.06 on device /dev/sg2
[coolscan] initialize_values
[coolscan]
[coolscan] 000: 15 10 00 00 14 00 00 00 00 08 00 00 00 00 00 00
[coolscan] 016: 00 01 03 06 00 00 0a 8c 00 00
[coolscan] sanei_scsi_cmd: returning 0 bytes:
[coolscan] Mode Sense...
[coolscan]
[coolscan] 000: 1a 18 03 00 0c 00
[coolscan] sanei_scsi_cmd: returning 12 bytes:
[coolscan]
[coolscan] 000: 0b 00 00 00 03 06 00 00 0a 8c 00 00
[coolscan] Mode Sensed (MUD is 2700)
[coolscan] get_internal_info
[coolscan] get_internal_info
[coolscan] wait_scanner: Testing if scanner is ready
[coolscan]
[coolscan] 000: 00 00 00 00 00 00
[coolscan] sanei_scsi_cmd: returning 0 bytes:
[coolscan] wait_scanner: scanner is ready
[coolscan]
[coolscan] 000: 28 00 e0 00 00 00 00 01 00 00
[coolscan] sanei_scsi_cmd: returning 256 bytes:
[coolscan]
[coolscan] 000: 0c 08 0a 8c 04 7f 06 bf 0a 1f 0f 2f 00 00 00 00
[coolscan] 016: 00 00 00 64 09 00 00 00 00 00 00 00 00 00 00 00
[coolscan] 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[coolscan] 048: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[coolscan] 064: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[coolscan] 080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[coolscan] adbits=12 outputbits=8 maxres=2700 xmax=1151 ymax=1727
xmaxpix=2591 ymaxpix=3887 ycurrent=0 currentfocus=100
autofeeder=No analoggamma=No currentscanpitch=9
White balance exposure time var [RGB]= 2781 2216 2895
Prescan result exposure time var [RGB]= 3939 8072 3939
Current exposure time var.[RGB]= 3939 8072 10546
Internal exposure time unit[RGB]= 2 4 2
offsetdata_[rgb]= 0x8d 0x8d 0x8e
limitcondition=0x7c
device error code = 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
power-on errors = 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[coolscan] backend runs on little endian machine
[coolscan] attach: dev->dpi_range.max = 2700.000000
[coolscan] attach_scanner done
[coolscan] attach_scanner: /dev/scanner
[coolscan] attach_scanner: opening /dev/scanner
[coolscan] attach_scanner: open failed
[coolscan] sane_get_devices
... at this point the device dialog appears and I click on the Nikon, and then:
[coolscan] sane_open
[coolscan] init_options
[coolscan] sane_get_option_descriptor 0
... at this point the "Error obtaining option count" dialog box appears
and I click "OK", and then:
[coolscan] sane_close
[coolscan] do_cancel
[coolscan] do_eof
[coolscan] do_cancel: kill reader_process
[coolscan] sane_exit
I took a look in the source (xsane.c) and traced it to this line:
if (xsane_control_option(xsane.dev, 0, SANE_ACTION_GET_VALUE, &xsane.num_elements, 0) != SANE_STATUS_GOOD)
{
xsane_back_gtk_error(ERR_OPTION_COUNT, TRUE);
sane_close(xsane.dev);
xsane_exit();
/* will never come to here */
}
... but I guess it's in the back-end somewhere.
That's as far as I got .... help!!!!
--
Bob Hepple
mailto:bhepple@freeshell.org http://bhepple.freeshell.org
Public Key: http://bhepple.freeshell.org/public_keys.txt
--Signature=_Sat__8_Jan_2005_18_39_08_+1000_ETl.WOxDtaT.IcA7
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)
iD8DBQFB35wsIUqTKyfdK8sRAljZAJ9WuZbme3pQPzV9fN5vzJX4UpvSFwCfck+N
x+VxMpoN4+l+c/GLqIJIZGQ=
=KTO0
-----END PGP SIGNATURE-----
--Signature=_Sat__8_Jan_2005_18_39_08_+1000_ETl.WOxDtaT.IcA7--