[sane-devel] some more libsane.usermap additions

[Olaf Meeuwissen]

Olaf Meeuwissen <olaf at member.fsf.org> writes:

> Julien BLACHE <jb at jblache.org> writes:
>
>> Olaf Meeuwissen <olaf.meeuwissen at avasys.jp> wrote:
>>
>>> +# Epson Corp.|GT-15000 (ES-7000)
>>> +# Epson Corp.|Expression 10000XL (ES-10000G)
>>> +# Epson Corp.|Perfection 4990 (GT-X800)
>>
>>> -# Epson Corp.|Stylus CX3650
>>> +# Epson Corp.|Stylus CX3500/CX3600/CX3650 (PX-A550)
>>
>>> +# Epson Corp.|Stylus CX4500/CX4600
>>
>>> -# Epson Corp.|Stylus RX620
>>> +# Epson Corp.|Stylus RX620/RX630 (PM-A870)
>>
>>> +# Epson Corp.|Stylus RX700 (PM-A900)
>>> +# Epson Corp.|(PM-A700)
>>> +# Epson Corp.|AcuLaser CX11 (LP-A500)
>>
>> All added/fixed, thanks.
>
> Thanks.
>
> I believe there are a few more descriptions that can be fixed and/or
> extended.  I'll see if I can find some time to check them later this
> weekend.  Guess I should also prepare a diff to add them to the list
> of supported scanners in the epson backend (epson_usb.c).

Diff for epson_usb.c attached.  I'll leave the decision whether to add
this or not so close to the release to Karl Heinz and Julien.

Adds the GT-X800/Perfection 4990, several SPCs and one MFP.  All other
changes just make the comments a bit more complete and readable.

Note, I have not tested the epson backend with these models but they
work fine with the epkowa backend.  I checked that backend's sources
to make sure there is no code specific to these models.

Hope this helps,
-- 
Olaf Meeuwissen
FSF Associate Member #1962           sign up at http://member.fsf.org/
GnuPG key: 30EF893A/2774 815B DE83 06C8 D733  6B5B 033C C857 30EF 893A
Penguin's lib!       -- I hack, therefore I am --               LPIC-2
-------------- next part --------------
--- downloads/epson_usb.c~	2005-07-30 09:12:30.000000000 +0900
+++ downloads/epson_usb.c	2005-07-30 10:44:29.000000000 +0900
@@ -23,15 +23,20 @@
   0x126,			/* ES-7000 / GT-15000 */
   0x128,			/* GT-X700 / Perfection 4870 */
   0x129,			/* ES-10000 / Expression 10000XL */
-  0x801,			/* CC-600 / CX-5[1234]00 */
-  0x802,			/* CC-570 / CX-3[12]00 */
-  0x805,			/* CX-6400 */
-  0x806,			/* PM-A850 / RX600 */
-  0x807,			/* RX-500 */
-  0x808,			/* CX-5400 */
-  0x80d,			/* CX-4600 */
-  0x80e,			/* CX-3650 */
-  0x80f,			/* RX-425 */
+  0x12a,			/* GT-X800 / Perfection 4990 */
+  0x801,			/* CC-600  / Stylus CX5100/CX5200/CX5300/CX5400 */
+  0x802,			/* CC-570  / Stylus CX3100/CX3200 */
+  0x805,			/*         / Stylus CX6300/CX6400/CX6500/CX6600 */
+  0x806,			/* PM-A850 / Stylus Photo RX600/RX610 */
+  0x807,			/*         / Stylus Photo RX500/RX510 */
+  0x808,			/*         / Stylus CX5400 */
+  0x80d,			/*         / Stylus CX4500/CX4600 */
+  0x80e,			/* PX-A550 / Stylus CX3500/CX3600/CX3650 */
+  0x80f,			/*         / Stylus Photo RX420/RX425/RX430 */
+  0x810,			/* PM-A900 / Stylus Photo RX700 */
+  0x811,			/* PM-A870 / Stylus Photo RX620/RX630 */
+  0x814,			/* PM-A700 */
+  0x815,			/* LP-A500 / AcuLaser CX11 */
   0				/* last entry - this is used for devices that are specified 
 				   in the config file as "usb <vendor> <product>" */
 };