[sane-devel] HP ScanJet 2300C and genesys backend
Stéphane VOLTZ
stefdev@modulonet.fr
Mon, 13 Jun 2005 06:16:03 +0200
Le Dimanche 12 Juin 2005 22:44, Nightwulf a écrit :
> 1. xscanimage:
> - 600dpi res, color, 16bits -> pic seems to be distorted (looks like a
> picture for the old 3d-glasses, red and green for left and right eye)
> - acquire preview doesn't work, the scan light carrier seems to hit the
> front of the scanner case (switched off quickly then)
>
Does it happen at every resolution ? Can you send a sample image ?
> 2. kooka
> - 600 dpi, color mode seems to hang up the scanner...the scan light seems
> to do one step forward and one back all the time
There is a bandwidth problem with libusb. When the scan is too wide
at high resolutions, data aren't read fast enough, and the scanner has to
pause (by going backward) waiting for the frontend. There's nothing that
can be done fixing that.
> - preview doesn't work, scanning lights are switched on and then nothing
> happens anymore
Unfortunately, there is a bug related to USB. HP2300C get stuck in warmup
after another session of a frontend ended. Re try with unplugging/plugging
scanner's usb cable.
>
> 3. scanimage
> - no problems so far using only standard scans (whole page, gray or color
> mode)
>
> I hope this helps. Please don't hesitate to tell me if I can be of further
> help.
>
> Greets,
>
> Torsten
Regards,
Stef