[sane-devel] ScanJet 4C
Ted Parks
tparks@linuxmail.org
Sun, 27 Mar 2005 08:41:42 +0800
New to Sane, I am trying to configure an old HP ScanJet 4C on my Linux box =
running FC2.
Dmesg suggests that FC found the SCSI controller:
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 SCSI adapter>
aic7870: Single Channel A, SCSI Id=3D7, 16/253 SCBs
=20
Vendor: HP Model: C2520A Rev: 3503
Type: Processor ANSI SCSI revision: 02
Vendor: HP Model: C2520A Rev: 3503
Type: Processor ANSI SCSI revision: 02
Vendor: HP Model: C2520A Rev: 3503
Type: Processor ANSI SCSI revision: 02
Vendor: HP Model: C2520A Rev: 3503
Type: Processor ANSI SCSI revision: 02
Vendor: HP Model: C2520A Rev: 3503
Type: Processor ANSI SCSI revision: 02
Vendor: HP Model: C2520A Rev: 3503
Type: Processor ANSI SCSI revision: 02
Vendor: HP Model: C2520A Rev: 3503
Type: Processor ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 3
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 3
Attached scsi generic sg2 at scsi0, channel 0, id 2, lun 0, type 3
Attached scsi generic sg3 at scsi0, channel 0, id 3, lun 0, type 3
Attached scsi generic sg4 at scsi0, channel 0, id 4, lun 0, type 3
Attached scsi generic sg5 at scsi0, channel 0, id 5, lun 0, type 3
Attached scsi generic sg6 at scsi0, channel 0, id 6, lun 0, type 3
But, when I run sane-find-scanner, sane reports that there are no SCSI scan=
ners attached, instead finding a USB scanner that does not exist. I created=
a symbolic link between /dev/scanner and /dev/sg0.=20=20
What am I doing wrong?
Thanks,
Ted Parks
--=20
______________________________________________
Check out the latest SMS services @ http://www.linuxmail.org=20
This allows you to send and receive SMS through your mailbox.
Powered by Outblaze