[sane-devel] Failed to start scanner : Error during device I/O on Canon N656U
on Debian sid
KLEIN Stéphane
stephane@harobed.org
Sat, 26 Mar 2005 12:31:41 +0100
This is a multi-part message in MIME format.
--------------040803040401010509050902
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Hi,
I would like use my Canon N656U scanner on Debian sid. I use kernel
2.6.10 on Laptop Acer TravelMate 292LMi.
I've do my test with Debian package (apt-get install sane xsane
sane-utils) and I also do test on compiled version of
sane-backends-1.0.15, sane-frontends-1.0.13 and xsane-0.97
When I launch sane-find-scanner I've this :
Harobed:/usr/local/src# sane-find-scanner
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04a9 [Canon], product=0x2206 [CanoScan],
chip=LM9832/3) at libusb:002:022
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
When I start scanimage -L, I've this :
Harobed:/usr/local/src# scanimage -L
device `plustek:libusb:002:022' is a Canon N650U/N656U USB flatbed scanner
When I launch xsane, and I click on Acquire preview I've this popup
dialog error : "Failed to start scanner: Error during device I/O".
The attach file is log file of debug environement variable :
SANE_DEBUG_PLUSTEK=128
Thanks for your help,
Stéphane KLEIN
--------------040803040401010509050902
Content-Type: text/x-log;
name="xsane.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="xsane.log"
[sanei_debug] Setting debug level of plustek to 128.
[plustek] Plustek backend V0.48-10, part of sane-backends 1.0.15
[plustek] ># Plustek-SANE Backend configuration file<
[plustek] ># For use with LM9831/2/3 based USB scanners<
[plustek] >#<
[plustek] ><
[plustek] ># each device needs at least two lines:<
[plustek] ># - [usb] vendor-ID and product-ID<
[plustek] ># - device devicename<
[plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device /dev/usbscanner<
[plustek] ># or<
[plustek] ># device libusb:bbb:ddd<
[plustek] ># where bbb is the busnumber and ddd the device number<
[plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd<
[plustek] >#<
[plustek] ># additionally you can specify some options<
[plustek] ># warmup, lOffOnEnd, lampOff<
[plustek] >#<
[plustek] ># For autodetection use<
[plustek] ># [usb]<
[plustek] ># device /dev/usbscanner<
[plustek] >#<
[plustek] ># or simply<
[plustek] ># [usb]<
[plustek] >#<
[plustek] ># or if you want a specific device but you have no idea about the<
[plustek] ># device node or you use libusb, simply set vendor- and product-ID<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device auto<
[plustek] >#<
[plustek] ># NOTE: autodetection is safe, as it uses the info it got<
[plustek] ># from the USB subsystem. If you're not using the<
[plustek] ># autodetection, you MUST have attached that device<
[plustek] ># at your USB-port, that you have specified...<
[plustek] >#<
[plustek] ><
[plustek] >[usb]<
[plustek] next device uses autodetection
[plustek] ... next device
[plustek] ><
[plustek] >#<
[plustek] ># options for the previous USB entry<
[plustek] >#<
[plustek] ># switch lamp off after xxx secs, 0 disables the feature<
[plustek] ># (can also be set via frontend)<
[plustek] >option lampOff 300<
[plustek] Decoding option >lampOff<
[plustek] ><
[plustek] ># warmup period in seconds, 0 means no warmup, -1 means auto-warmup<
[plustek] ># (can also be set via frontend)<
[plustek] >option warmup -1<
[plustek] Decoding option >warmup<
[plustek] ><
[plustek] ># 0 means leave lamp-status untouched, not 0 means switch off<
[plustek] ># on sane_close<
[plustek] ># (can also be set via frontend)<
[plustek] >option lOffOnEnd 1<
[plustek] Decoding option >lOffOnEnd<
[plustek] ><
[plustek] >#<
[plustek] ># options to tweak the image start-position<
[plustek] ># (WARNING: there's no internal range check!!!)<
[plustek] >#<
[plustek] ># for the normal scan area<
[plustek] >#<
[plustek] >option posOffX 0<
[plustek] Decoding option >posOffX<
[plustek] >option posOffY 0<
[plustek] Decoding option >posOffY<
[plustek] ><
[plustek] ># for transparencies<
[plustek] >option tpaOffX 0<
[plustek] Decoding option >tpaOffX<
[plustek] >option tpaOffY 0<
[plustek] Decoding option >tpaOffY<
[plustek] ><
[plustek] ># for negatives<
[plustek] >option negOffX 0<
[plustek] Decoding option >negOffX<
[plustek] >option negOffY 0<
[plustek] Decoding option >negOffY<
[plustek] ><
[plustek] >#<
[plustek] ># for setting the calibration strip position<
[plustek] ># (WARNING: there's no internal range check!!!)<
[plustek] ># -1 means use built in<
[plustek] ># (can also be set via frontend)<
[plustek] >option posShadingY -1<
[plustek] Decoding option >posShadingY<
[plustek] >option tpaShadingY -1<
[plustek] Decoding option >tpaShadingY<
[plustek] >option negShadingY -1<
[plustek] Decoding option >negShadingY<
[plustek] ><
[plustek] >#<
[plustek] ># to invert the negatives, 0 disables the feature<
[plustek] >#<
[plustek] >option invertNegatives 0<
[plustek] Decoding option >invertNegatives<
[plustek] ><
[plustek] >#<
[plustek] ># to disable the internal sensor speedup function,<
[plustek] ># 1 disables the feature<
[plustek] >#<
[plustek] >option disableSpeedup 0<
[plustek] Decoding option >disableSpeedup<
[plustek] ><
[plustek] >#<
[plustek] ># to save/restore coarse calibration data<
[plustek] ># (can also be set via frontend)<
[plustek] >option cacheCalData 0<
[plustek] Decoding option >cacheCalData<
[plustek] ><
[plustek] >#<
[plustek] ># use alternate calibration routines<
[plustek] >#<
[plustek] >option altCalibration 0<
[plustek] Decoding option >altCalibration<
[plustek] ><
[plustek] >#<
[plustek] ># for skipping whole calibration step<
[plustek] >#<
[plustek] >option skipCalibration 0<
[plustek] Decoding option >skipCalibration<
[plustek] ><
[plustek] >#<
[plustek] ># for skipping entire fine calibration step<
[plustek] ># coarse calibration is done<
[plustek] >#<
[plustek] >option skipFine 0<
[plustek] Decoding option >skipFine<
[plustek] ><
[plustek] >#<
[plustek] ># discard the result of the fine white calibration<
[plustek] >#<
[plustek] >option skipFineWhite 0<
[plustek] Decoding option >skipFineWhite<
[plustek] ><
[plustek] ># for replacing the gain values found during coarse<
[plustek] ># calibration<
[plustek] ># (can also be set via frontend)<
[plustek] >option red_gain -1<
[plustek] Decoding option >red_gain<
[plustek] >option green_gain -1<
[plustek] Decoding option >green_gain<
[plustek] >option blue_gain -1<
[plustek] Decoding option >blue_gain<
[plustek] ><
[plustek] ># for replacing the offset values found during coarse<
[plustek] ># calibration<
[plustek] ># (can also be set via frontend)<
[plustek] >option red_offset -1<
[plustek] Decoding option >red_offset<
[plustek] >option green_offset -1<
[plustek] Decoding option >green_offset<
[plustek] >option blue_offset -1<
[plustek] Decoding option >blue_offset<
[plustek] ><
[plustek] >#<
[plustek] ># for replacing the default lampoff settings, this<
[plustek] ># works only for CIS devices like CanoScan LiDE20<
[plustek] ># (can also be set via frontend)<
[plustek] >option red_lampoff -1<
[plustek] Decoding option >red_lampoff<
[plustek] >option green_lampoff -1<
[plustek] Decoding option >green_lampoff<
[plustek] >option blue_lampoff -1<
[plustek] Decoding option >blue_lampoff<
[plustek] ><
[plustek] >#<
[plustek] ># for adjusting the default gamma values<
[plustek] ># (can also be set via frontend)<
[plustek] >option redGamma 1.0<
[plustek] Decoding option >redGamma<
[plustek] >option greenGamma 1.0<
[plustek] Decoding option >greenGamma<
[plustek] >option blueGamma 1.0<
[plustek] Decoding option >blueGamma<
[plustek] >option grayGamma 1.0<
[plustek] Decoding option >grayGamma<
[plustek] ><
[plustek] >#<
[plustek] ># to enable TPA (EPSON or UMAX, if autodetection fails)<
[plustek] ># 0 means default behaviour as specified in the internal tables<
[plustek] ># 1 means enable (needed for UMAX 3450)<
[plustek] >option enableTPA 0<
[plustek] Decoding option >enableTPA<
[plustek] ><
[plustek] >#<
[plustek] ># model override functionality, currently only available for<
[plustek] ># Mustek devices, using NSCs' vendor ID: 0x0400 and<
[plustek] ># also their product ID: 0x1000 (LM9831) 0x1001 (LM9832)<
[plustek] >#<
[plustek] ># mov/PID | 0x1000 | 0x1001<
[plustek] ># ---------------------------------------<
[plustek] ># 0 (default)| BearPaw1200 | BearPaw 2400<
[plustek] ># 1 | ignored | BearPaw 1200<
[plustek] >#<
[plustek] >option mov 0<
[plustek] Decoding option >mov<
[plustek] ><
[plustek] >#<
[plustek] ># and of course the device-name<
[plustek] >#<
[plustek] ># device /dev/usbscanner<
[plustek] >device auto<
[plustek] Decoding device name >auto<
[plustek] ><
[plustek] >#<
[plustek] ># to define a new device, start with a new section:<
[plustek] ># [usb]<
[plustek] >#<
[plustek] attach (auto, 0xbfffc420, (nil))
[plustek] Device configuration:
[plustek] device name : >auto<
[plustek] USB-ID : ><
[plustek] model ovr. : 0
[plustek] warmup : -1s
[plustek] lampOff : 300
[plustek] lampOffOnEnd : yes
[plustek] cacheCalData : no
[plustek] altCalibrate : no
[plustek] skipCalibr. : no
[plustek] skipFine : no
[plustek] skipFineWhite: no
[plustek] invertNegs. : no
[plustek] dis.Speedup : no
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] pos_shading_y: -1
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] tpa_shading_y: -1
[plustek] red gain : -1
[plustek] green gain : -1
[plustek] blue gain : -1
[plustek] red offset : -1
[plustek] green offset : -1
[plustek] blue offset : -1
[plustek] red lampoff : -1
[plustek] green lampoff: -1
[plustek] blue lampoff : -1
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] usbDev_open(auto,)
[plustek] Autodetection...
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0016
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0007
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x0005
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0012
[plustek] Checking for 0x0400-0x1000
[plustek] Checking for 0x0400-0x1001
[plustek] Checking for 0x0400-0x1001
[plustek] Checking for 0x0458-0x2007
[plustek] Checking for 0x0458-0x2008
[plustek] Checking for 0x0458-0x2009
[plustek] Checking for 0x0458-0x2013
[plustek] Checking for 0x0458-0x2015
[plustek] Checking for 0x0458-0x2016
[plustek] Checking for 0x03f0-0x0505
[plustek] Checking for 0x03f0-0x0605
[plustek] Checking for 0x04b8-0x010f
[plustek] Checking for 0x04b8-0x011d
[plustek] Checking for 0x1606-0x0050
[plustek] Checking for 0x1606-0x0060
[plustek] Checking for 0x1606-0x0160
[plustek] Checking for 0x049f-0x001a
[plustek] Checking for 0x04a9-0x2206
[plustek] Found device at >libusb:002:021<
[plustek] Vendor ID=0x04A9, Product ID=0x2206
[plustek] usbio_DetectLM983x
[plustek] usbio_DetectLM983x: found LM9832/3
[plustek] Detected vendor & product ID: 0x04A9-0x2206
[plustek] Device description for >0x04A9-0x2206< found.
[plustek] usb_initDev(38,0x04a9,-1)
[plustek] Device WAF: 0x00000006
[plustek] Device Flags: 0x00000000
[plustek] Vendor adjusted to: >Canon<
[plustek] LAMP-STATUS: 0x00000000
[plustek] RESETTING REGISTERS(-1)
[plustek] SETTING THE MISC I/Os
[plustek] MISC I/O after RESET: 0x66, 0x16, 0x91
[plustek] UIO error
[plustek] Calibration file-name set to:
[plustek] >/root/.sane/Canon-N650U_N656U.cal<
[plustek] usb_SetScanParameters()
[plustek] UIO error
[plustek] UIO error
[plustek] usbDev_getCaps()
[plustek] Scanner information:
[plustek] Vendor : Canon
[plustek] Model : N650U/N656U
[plustek] Flags : 0x00000000
[plustek] drvclose()
[plustek] usbDev_stopScan()
[plustek] usbDev_ScanEnd(), start=0, park=0
[plustek] UIO error
[plustek] usbDev_close()
[plustek] attach: model = >N650U/N656U<
[plustek] sane_get_devices (0xbfffe548, 0)
[plustek] sane_open - libusb:002:021
[plustek] Presetting Gamma tables (len=4096)
[plustek] * Channel[0], gamma 2.000
[plustek] * Channel[1], gamma 2.000
[plustek] * Channel[2], gamma 2.000
[plustek] * Channel[3], gamma 2.000
[plustek] ----------------------------------
[plustek] NOT using custom gamma settings.
[plustek] Presetting Gamma tables (len=4096)
[plustek] * Channel[0], gamma 2.000
[plustek] * Channel[1], gamma 2.000
[plustek] * Channel[2], gamma 2.000
[plustek] * Channel[3], gamma 2.000
[plustek] ----------------------------------
[plustek] Lamp-Timer stopped
[plustek] Lamp-Timer stopped
[plustek] sane_start
[plustek] usbDev_open(libusb:002:021,)
[plustek] sane_start: open failed: 9
[plustek] sane_cancel
[plustek] sane_start
[plustek] usbDev_open(libusb:002:021,)
[plustek] sane_start: open failed: 9
[plustek] sane_cancel
--------------040803040401010509050902--