[sane-devel] hp scanjet 3690 and sane-genesys
maurizio
lgigo at libero.it
Tue Sep 20 07:20:12 UTC 2005
Hello all
I attached my scaneer to the linux box and follow man advices. Running
as admin I got the following info.
Any other advice wil be welcome.
# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 03f0:1405 Hewlett-Packard Scanjet 3670
Bus 001 Device 001: ID 0000:0000
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1405 [HP
Scanjet Scanner], chip=GL646_HP) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# scanimage -L
device `genesys:libusb:001:003' is a Hewlett Packard ScanJet 3670c
flatbed scanner
>>>>>>>Next command will make the scanner try to move some devices
inside for 1-2 minuttes before to give the error message<<<<<<<<<<<<<
# scanimage
[genesys] WARNING: Your scanner is not fully supported or at least
[genesys] had only limited testing. Please be careful and
[genesys] report any failure/success to
[genesys] sane-devel at lists.alioth.debian.org. Please provide as
many
[genesys] details as possible, e.g. the exact name of your
[genesys] scanner and what does (not) work.
scanimage: sane_start: Error during device I/O
# less dmesg |grep Linux version
Linux version 2.6.8-2-k7 (horms at tabatha.lab.ultramonkey.org) (gcc
version 3.3.5 (Debian 1:3.3.5-12)) #1 Thu May 19 18:03:29 JST 2005
# less /var/log/dmesg |grep usb
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usb 1-1: new full speed USB device using address 2
More information about the sane-devel
mailing list