[sane-devel] Lexmark x1250 All-in-one - Scanner don't work !

[Dalai Felinto]

Hi!
I am the happy proprietor of a Lexmark x1250, all-in-one, fax, scanner,
printer, (it washes, it passes, it kitchen... ; ) )
The printer is already working (with drive z600), but unhappily scanner is
another story.

I installed the packages "sane" and "sane-utils" (by apt-get in Ubuntu 6.06
).

When I run xsane, it simply says that "no available device exist".

The output from commands:

#lsusb

Bus 003 Device 003: ID 043d:007d Lexmark International, Inc.



#sane-find-scanner

found USB scanner (vendor=0x043d, product=0x007d, chip=rts8858c?) at
libusb:003:003



#sudo lsusb -v -v

Bus 003 Device 003: ID 043d:007d Lexmark International, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x043d Lexmark International, Inc.
  idProduct          0x007d
  bcdDevice            1.00
  iManufacturer           1 Lexmark
  iProduct                2 X1200 Series
  iSerial                 7 0L02KV4
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          6 USB SCANNER
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol    255
      iInterface              9 Bulk-In Bulk-Out Interrupt-In
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval             250
Device Status:     0x0001
  Self Powered




What can I do to improve debug, or make it works?

Regards,

Dalai Felinto
Rio de Janeiro - Brasil

http://blendermaniacos.blogspot.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20061205/62892365/attachment.html