[sane-devel] Microtek 4800 scanner

[Dale Farmer]

I have installed Mandiva 2007 and everything works except my Microtek
scanner model 4800.

The sane-backend is 1.0.18.

When I run sane-find-scanner, it is detected.

When I run scanimage -L in both the user and root levels no scanners
were identified.

When I run lsusb -vv it the scaner is detected as indicated below.

Bus 001 Device 002: ID 05da:20a7 Microtek International, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass         3
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x05da Microtek International, Inc.
  idProduct          0x20a7
  bcdDevice            0.00
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x40
      (Missing must-be-set bit!)
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         0 (Defined at Interface level)
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               0
Device Status:     0x0001
  Self Powered

Any help would be appreciated, if not I guess it's back to the evil
empire :(