[sane-devel] add support fujitsu 5120

[m. allan noah]

this is with the 'up2' version of the backend? can you do this:

SANE_DEBUG_FUJITSU=255 scanimage -L

can you do this as root too?

allan

On Wed, 22 Feb 2006, Benoît Dejean wrote:

> Le mardi 21 février 2006 à 10:01 -0500, m. allan noah a écrit :
>> benoit, thanks for the hack :) i am currently re-writing the fujitsu
>> backend to better support the newer model usb scanners. i would not use it
>> for your customers, but i have been placing the updated backend here:
>>
>> http://www2.pfeiffer.edu/~anoah/fujitsu/
>>
>> can i ask you to test this code in the future, as i make new versions?
>
> I would certainly but "CURRENTLY FOR USB ONLY! SCSI IS BROKEN!"
> prevents me from doing it. We never managed to make 4120 work reliably
> with USB, that's why we use only the SCSI interface. Btw, i've tried
> your fujitsu backend (+ one line patch to detect the 5120). It's no
> usable by USB, scanimage just hangs. Here is what i've tried :
>
>
> $ sane-find-scanner
> found USB scanner (vendor=0x04c5, product=0x10e0) at libusb:001:004
>
> $ sudo vim /etc/sane.d/fujitsu.conf
>
> $ cat /etc/sane.d/fujitsu.conf
> scsi FUJITSU
> usb 0x04c5 0x10e0
> option force-model fi-4x20
>
> $ scanimage -L
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
>
>
> /proc/bus/usb/devices :
> T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=04c5 ProdID=10e0 Rev= 1.00
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 98mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us
>
> syslog :
> ehci_hcd 0000:00:03.3: port 7 high speed
> ehci_hcd 0000:00:03.3: GetStatus port 7 status 001005 POWER sig=se0 PE CONNECT
> usb 1-7: new device strings: Mfr=0, Product=0, SerialNumber=0
> usb 1-7: hotplug
> usb 1-7: adding 1-7:1.0 (config #1, interface 0)
> usb 1-7:1.0: hotplug
>
> Thanks.
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>

-- 
"so don't tell us it can't be done, putting down what you don't know.
money isn't our god, integrity will free our souls" - Max Cavalera