[sane-devel] Re: Plustek ScanCopy 115 Driver needed.
djfarid at gmail.com
Tue Feb 28 16:52:27 UTC 2006
I have added my scanner codes into /etc/hotplug/usb/libsane.usermap.
Output of sane-find-scanner -q :
found USB scanner (vendor=0x07b3 [PLUSTEK INC], product=0x081c
[USB2.0SCANNER], chip=GL841) at libusb:003:005
found USB scanner (vendor=0x046d, product=0x0850) at libusb:001:004
But scanimage -L gives me only this:
device `v4l:/dev/video0' is a Noname BT878 video (Hauppauge (bt878)) virtual
Note: I have a Hauppage PCI tv card installed.
I'm using gentoo Linux.
Is there anything I could do which I haven't already done, to try and get my
On 2/27/06, Farid Joubbi <djfarid at gmail.com> wrote:
> I am a owner of a Plustek ScanCopy 115. I really would like to use it in
> After some searching on the net, I found a SANE related Plustek page (
> http://www.gjaeger.de/scanner/plustek.html ). Since my scanner model was
> not listed in the supported models, I emailed Gerhard Jäger and asked for
> This is the reply from him:
> "first of all I never saw that Plustek device before.
> Then from what I cn see in the driver, it's probably a
> GenesysLogic based device - but I'm not sure.
> So the experimental backend genesys might be your friend.
> Guess you have to ask the guys on the sane-devel list,
> as I haven't develop this backend...
> So now I am asking you for help.
> Here is a link with a picture of the scanner, manual and Win32 drivers for
> it: http://www.plustek.com/download/scancopy115.htm
> lsusb gives this:
> Bus 003 Device 005: ID 07b3:081c Plustek, Inc
> Thankful for any help.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the sane-devel