[sane-devel] Mustek 1200 CP not working with sane 1.0.17 on FreeBSD

[Jochen Eisinger]

Hi,

Dura-Zell wrote:
> [sanei_pa4s2] pa4s2_open: device `0x378` opened...
this looks good...

> [sanei_pa4s2] pa4s2_readbyte_nib: reading value 0x77 from '0x378'
and this looks very bad. should be A5 or A8 or similar.

is your parallel port configured in EPP mode (maybe you can configure
that in the BIOS?

regards
-- jochen