[sane-devel] [patch] epkowa.desc
Olaf Meeuwissen
olaf.meeuwissen at avasys.jp
Tue Jun 20 01:29:42 UTC 2006
I know I've sent mail about this to the list (it's in the archives)
but I can't seem to find my reply in my mailbox anymore :-(
Anyway, here is the patch for epkowa.desc that I promised. The patch
is against 1.11 in CVS. It incorporates information from epson.desc
1.26 and unsupported.desc 1.255.
I've dropped the silly(?) notion that EPSON AVASYS' QA department
decides the support :status of the devices listed and synchronised
them with the contents in epson.desc. That leads to quite a lot of
change, but I hope it is in the user's best interest.
As I noticed an incorrect USB ID in epson.desc, I also attached a
patch for that. The ID mentioned is the one for the GT-6600 (aka
Perfection 610). Note that the Stylus CX6600 is also reported to
have an ID of 0x0813 somewhere in the list archive. I didn't add
this because epson_usb.c does not list it either.
If some kind SANE developer could commit this, I'd be grateful.
Hope this helps,
--
Olaf Meeuwissen EPSON AVASYS Corporation, SE1
FSF Associate Member #1962 sign up at http://member.fsf.org/
GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97 976A 16C7 F27D 6BE3 7D90
Penguin's lib! -- I hack, therefore I am -- LPIC-2
-------------- next part --------------
--- ../../epkowa-1.11.desc 2006-06-15 16:45:23.000000000 +0900
+++ doc/epkowa.desc 2006-06-20 10:20:10.000000000 +0900
@@ -22,35 +22,28 @@
;;; This list of devices was compiled from the following sources:
;;;
-;;; * iscan-1.18.0/NEWS
-;;; * iscan-1.18.0/doc/sane-epkowa.man
-;;; * iscan-1.18.0/backend/epkowa_usb.c
-;;; * sane-backends-1.0.15/backend/epson_usb.c
-;;; * sane-backends-1.0.15/doc/descriptions/epson.desc
+;;; * iscan-2.1.0/NEWS
+;;; * iscan-2.1.0/doc/sane-epkowa.man
+;;; * iscan-2.1.0/backend/epkowa_usb.c
+;;; * sane-backends/backend/epson_usb.c (CVS 1.18)
+;;; * sane-backends/doc/descriptions/epson.desc (CVS 1.26)
;;; * http://www.freecolormanagement.com/sane/supported.html
;;; * http://www.sane-project.org/lists/sane-mfgs-cvs.html#Z-EPSON
;;; * http://www.epsondevelopers.com/
;;; * http://www.epson.com/ (several representative countries)
;;; * http://www.i-love-epson.co.jp/
+;;; * messages on the sane-devel and LinuxPrinting.org epson-list
+;;; mailing lists
;; Backend data.
;;
:backend "epkowa"
-:version "1.18.0"
-:url "http://www.avasys.jp/english/linux_e/dl_scan.html"
+:version "2.1.0"
+:url "http://www.avasys.jp/english/linux_e/index.html"
-:comment "Based on the epson backend of sane-backends-1.0.15."
+;:comment "Based on the epson backend of sane-backends-1.0.15."
-; AFAIK, all devices listed on the sane-epkowa.man page have been
-; tested by EPSON AVASYS Corporation but _only_ for SCSI and USB
-; interfaces. The IEEE1394 and parallel interfaces have never been
-; tested. These models have all been marked :complete (even though
-; some are not really quite :complete). All other devices have, in
-; principle, been marked as :unsupported.
-; Devices supported by the epson backend (as of version 1.0.15 of
-; sane-backends) as well as overseas versions of supported models
-; have been marked :untested.
;; Device and manufacturer information.
;;
@@ -78,16 +71,22 @@
;;
:model "Actionscanner II"
-:interface "parallel"
-:status :untested ; :good
+:interface "parallel SCSI"
+:status :good
:comment "overseas version of the GT-5000"
:model "AcuLaser CX11"
:interface "USB"
:usbid "0x04b8" "0x0815"
-:status :complete
+:status :good
:comment "overseas version of the LP-A500"
+:model "AcuLaser CX11NF"
+:interface "USB"
+:usbid "0x04b8" "0x0815"
+:status :good
+:comment "AcuLaser CX11 with network interface and fax<br>network interface not supported"
+
:model "CC-500L" ; product spec (JP)
:interface "USB"
:status :unsupported
@@ -101,13 +100,13 @@
:model "CC-570L" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0802"
-:status :untested ; :good
+:status :good
:comment "all-in-one"
:model "CC-600PX" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0801"
-:status :complete
+:status :good
:comment "all-in-one"
:model "CC-700" ; product spec (JP)
@@ -117,17 +116,21 @@
:model "ES-300C"
:interface "SCSI parallel"
-:status :untested ; :good
+:status :good
:comment "overseas version of the GT-6000"
+:model "ES-300GS"
+:interface "SCSI"
+:status :good
+
:model "ES-600C"
:interface "parallel"
-:status :untested ; :good
+:status :good
:comment "overseas version of the GT-5400"
:model "ES-800C"
:interface "SCSI"
-:status :untested ; :good
+:status :good
:comment "overseas version of the GT-8000"
:model "ES-1000C"
@@ -136,7 +139,7 @@
:model "ES-1200C"
:interface "parallel"
-:status :untested ; :good
+:status :good
:comment "overseas version of the GT-9000"
:model "ES-2000" ; product spec (JP)
@@ -153,22 +156,22 @@
:model "ES-6000" ; product spec (JP)
:interface "SCSI"
-:status :complete
+:status :good
:model "ES-6000H" ; product spec (JP)
:interface "SCSI"
-:status :complete
+:status :good
:comment "IEEE1394 untested"
:model "ES-6000HS" ; product spec (JP)
:interface "SCSI"
-:status :complete
+:status :good
:comment "IEEE1394 untested"
:model "ES-7000H" ; product spec (JP)
:interface "SCSI USB"
:usbid "0x04b8" "0x0126"
-:status :complete
+:status :good
:comment "IEEE1394 untested; 100Base-TX/10Base-T unsupported"
:model "ES-8000"
@@ -178,28 +181,28 @@
:model "ES-8500" ; product spec (JP)
:interface "SCSI USB"
:usbid "0x04b8" "0x0109"
-:status :complete
+:status :good
:comment "IEEE1394 untested"
:model "ES-9000H" ; product spec (JP)
:interface "SCSI"
-:status :complete
+:status :good
:comment "IEEE1394 untested"
:model "ES-10000G" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0129"
-:status :complete
+:status :good
:comment "IEEE1394 untested<br>100Base-TX/10Base-T unsupported"
:model "Expression 636"
:interface "SCSI"
-:status :untested ; :complete
+:status :complete
:comment "overseas version of the GT-9500"
:model "Expression 800" ; command spec
:interface "SCSI"
-:status :untested ; :complete
+:status :complete
:comment "overseas version of the GT-9600"
:model "Expression 836XL" ; command spec
@@ -216,7 +219,7 @@
:model "Expression 1640XL" ; command spec
:interface "SCSI USB"
:usbid "0x04b8" "0x0109"
-:status :complete
+:status :good
:comment "overseas version of the ES-8500<br>IEEE1394 untested"
:model "Expression 1680" ; command spec
@@ -225,44 +228,73 @@
:status :complete
:comment "overseas version of the ES-2200<br>IEEE1394 untested"
+:model "Expression 1680 Pro"
+:interface "SCSI USB"
+:status :untested
+:comment "IEEE1394 option"
+
+:model "Expression 1680XL Pro"
+:interface "SCSI USB"
+:status :untested
+
:model "Expression 10000XL" ; command spec
:interface "USB"
:usbid "0x04b8" "0x0129"
-:status :complete
+:status :good
:comment "overseas version of the ES-10000G<br>IEEE1394 untested; 100Base-TX/10Base-T unsupported"
+:model "Expression 10000XL Graphic Arts"
+:interface "USB IEEE1394"
+:status :untested
+:comment "Ethernet option"
+
+:model "Expression 10000XL Photo"
+:interface "USB IEEE1394"
+:status :untested
+:comment "Ethernet option"
+
:model "F-3200" ; product spec (JP)
:interface "USB IEEE1394"
:status :unsupported
:comment "Film scanner"
+:model "F-3200 Photo"
+:interface "USB IEEE1394"
+:status :unsupported
+
:model "FilmScan 200"
:interface "SCSI"
:status :unsupported
:comment "A better backend for the FilmScan 200 can be found at <A HREF=\"http://www.vjet.demon.co.uk/scanner/\">http://www.vjet.demon.co.uk/scanner/</A>."
+:url "http://www.vjet.demon.co.uk/scanner/"
+
+:model "GT-2200"
+:interface "USB"
+:usbid "0x04b8" "0x0102"
+:status :unsupported
:model "GT-4000"
:status :untested
:model "GT-5000"
-:interface "parallel"
-:status :untested ; :good
+:interface "parallel SCSI"
+:status :good
:model "GT-5400"
:interface "parallel"
-:status :untested ; :good
+:status :good
:model "GT-5500"
:interface "SCSI"
-:status :untested ; :good
+:status :good
:model "GT-6000"
:interface "SCSI Parport"
-:status :untested ; :good
+:status :good
:model "GT-6500"
:interface "parallel"
-:status :untested ; :good
+:status :good
:comment "overseas version of the GT-5400"
:model "GT-6600U" ; product spec (JP)
@@ -277,23 +309,23 @@
:model "GT-7000S"
:interface "SCSI"
-:status :untested ; :complete
+:status :complete
:model "GT-7000U"
:interface "USB"
:usbid "0x04b8" "0x0101"
-:status :untested ; :complete
+:status :complete
:model "GT-7200U" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x010f"
-:status :complete
+:status :good
:comment "requires a DFSG non-free module<br>also supported by the plustek backend"
:model "GT-7300U" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x011d"
-:status :complete
+:status :good
:comment "requires a DFSG non-free module<br>also supported by the plustek backend"
:model "GT-7400U" ; product spec (JP)
@@ -325,7 +357,7 @@
:model "GT-8000"
:interface "SCSI"
-:status :untested ; :good
+:status :good
:model "GT-8200U" ; product spec (JP)
:interface "USB"
@@ -335,7 +367,7 @@
:model "GT-8200UF" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0110"
-:status :complete
+:status :good
:model "GT-8300UF" ; product spec (JP)
:interface "USB"
@@ -357,12 +389,12 @@
:model "GT-8700F" ; product spec (JP)
:interface "SCSI USB"
:usbid "0x04b8" "0x010a"
-:status :complete
+:status :good
:comment "GT-8700U with TPU option bundled"
:model "GT-9000"
:interface "parallel"
-:status :untested ; :good
+:status :good
:model "GT-9300UF" ; product spec (JP)
:interface "USB"
@@ -372,16 +404,16 @@
:model "GT-9400UF" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0116"
-:status :complete
+:status :good
:comment "requires a DFSG non-free module"
:model "GT-9500"
:interface "SCSI"
-:status :untested ; :complete
+:status :complete
:model "GT-9600"
:interface "SCSI"
-:status :untested ; :complete
+:status :complete
:model "GT-9700F" ; product spec (JP)
:interface "USB"
@@ -397,12 +429,12 @@
:model "GT-10000"
:interface "SCSI"
-:status :complete
+:status :good
:comment "overseas version of the ES-6000"
:model "GT-10000+" ; command spec
:interface "SCSI"
-:status :complete
+:status :good
:comment "overseas version of the ES-6000H<br>IEEE1394 untested"
:model "GT-12000"
@@ -413,12 +445,12 @@
:model "GT-15000" ; command spec
:interface "SCSI USB"
:usbid "0x04b8" "0x0126"
-:status :complete
+:status :good
:comment "overseas version of the ES-7000H<br>IEEE1394 untested"
:model "GT-30000" ; command spec
:interface "SCSI"
-:status :complete
+:status :good
:comment "overseas version of the ES-9000H<br>IEEE1394 untested"
:model "GT-F500" ; product spec (JP)
@@ -460,15 +492,21 @@
:model "GT-X750"
:interface "USB"
:usbid "0x04b8" "0x0119"
-:status :complete
+:status :good
:comment "requires a DFSG non-free module"
:model "GT-X800" ; product spec (JP)
:interface "USB IEEE1394"
:usbid "0x04b8" "0x012a"
-:status :good
+:status :complete
:comment "IEEE1394 untested<br>film area guide mode not supported"
+:model "GT-X900"
+:interface "USB IEEE1394"
+:usbid "0x04b8" "0x012c"
+:status :good
+:comment "IEEE1394 untested"
+
:model "LP-7900CS"
:status :untested
:comment "business all-in-one; scanner is a ES-7000H"
@@ -512,49 +550,73 @@
:model "LP-A500"
:interface "USB"
:usbid "0x04b8" "0x0815"
-:status :complete
+:status :good
:comment "business all-in-one<br>network interface not supported"
:model "LP-M5500"
:interface "USB"
:usbid "0x04b8" "0x0817"
-:status :complete
+:status :good
:comment "business all-in-one<br>network interface not supported"
:model "LP-M5500F"
:interface "USB"
:usbid "0x04b8" "0x0817"
-:status :complete
+:status :good
:comment "business all-in-one<br>LP-M5500 with the fax option bundled<br>network interface not supported"
:model "PM-A700" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0814"
-:status :complete
+:status :good
+:comment "all-in-one"
+
+:model "PM-A750"
+:interface "USB"
+:usbid "0x04b8" "0x081a"
+:status :good
:comment "all-in-one"
:model "PM-A850" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0806"
-:status :complete
+:status :good
:comment "all-in-one"
:model "PM-A870" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0811"
-:status :complete
+:status :good
+:comment "all-in-one"
+
+:model "PM-A890"
+:interface "USB"
+:usbid "0x04b8" "0x081c"
+:status :good
:comment "all-in-one"
:model "PM-A900" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x0810"
-:status :complete
+:status :good
+:comment "all-in-one"
+
+:model "PM-A950"
+:interface "USB"
+:usbid "0x04b8" "0x081d"
+:status :good
:comment "all-in-one"
:model "PX-A550" ; product spec (JP)
:interface "USB"
:usbid "0x04b8" "0x080e"
-:status :complete
+:status :good
+:comment "all-in-one"
+
+:model "PX-A650"
+:interface "USB"
+:usbid "0x04b8" "0x0819"
+:status :good
:comment "all-in-one"
:model "Perfection 600"
@@ -570,13 +632,13 @@
:model "Perfection 636S"
:interface "SCSI"
-:status :untested ; :complete
+:status :complete
:comment "overseas version of the GT-7000S"
:model "Perfection 636U" ; command spec
:interface "USB"
:usbid "0x04b8" "0x0101"
-:status :untested ; :complete
+:status :complete
:comment "overseas version of the GT-7000U"
:model "Perfection 640U" ; command spec
@@ -587,6 +649,7 @@
:model "Perfection 660"
:interface "USB"
+:usbid "0x04b8" "0x0114"
:status :unsupported
:comment "supported by the snapscan backend"
@@ -605,7 +668,7 @@
:interface "USB"
:usbid "0x04b8" "0x0104"
:status :complete
-:comment "overseas version of the GT-7600UF"
+:comment "overseas version of the GT-7600UF<br>Perfection 1200U with TPU option bundled"
:model "Perfection 1240U" ; command spec
:interface "USB"
@@ -616,25 +679,25 @@
:model "Perfection 1250"
:interface "USB"
:usbid "0x04b8" "0x010f"
-:status :complete
+:status :good
:comment "overseas version of the GT-7200U<br>requires a DFSG non-free module<br>also supported by the plustek backend"
:model "Perfection 1250 PHOTO"
:interface "USB"
:usbid "0x04b8" "0x010f"
-:status :complete
+:status :good
:comment "Perfection 1250 with TPU option bundled<br>requires a DFSG non-free module<br>also supported by the plustek backend"
:model "Perfection 1260"
:interface "USB"
:usbid "0x04b8" "0x011d"
-:status :complete
+:status :good
:comment "overseas version of the GT-7300U<br>requires a DFSG non-free module<br>also supported by the plustek backend"
:model "Perfection 1260 PHOTO"
:interface "USB"
:usbid "0x04b8" "0x011d"
-:status :complete
+:status :good
:comment "Perfection 1260 with TPU option bundled<br>requires a DFSG non-free module<br>also supported by the plustek backend"
:model "Perfection 1270"
@@ -642,6 +705,10 @@
:status :unsupported
:comment "may be supported by the snapscan backend"
+:model "Perfection 1600"
+:interface "SCSI"
+:status :unsupported
+
:model "Perfection 1640SU" ; command spec
:interface "SCSI USB"
:usbid "0x04b8" "0x010a"
@@ -651,7 +718,7 @@
:model "Perfection 1640SU PHOTO"
:interface "SCSI USB"
:usbid "0x04b8" "0x010a"
-:status :complete
+:status :good
:comment "overseas version of the GT-8700F"
:model "Perfection 1650" ; command spec
@@ -663,7 +730,7 @@
:model "Perfection 1650 PHOTO"
:interface "USB"
:usbid "0x04b8" "0x0110"
-:status :complete
+:status :good
:comment "overseas version of the GT-8200UF"
:model "Perfection 1660 PHOTO" ; command spec
@@ -674,9 +741,16 @@
:model "Perfection 1670"
:interface "USB"
+:usbid "0x04b8" "0x011f"
:status :unsupported
:comment "supported by the snapscan backend"
+:model "Perfection 1670 PHOTO"
+:interface "USB"
+:usbid "0x04b8" "0x011f"
+:status :unsupported
+:comment "may be supported by the snapscan backend"
+
:model "Perfection 2400 PHOTO" ; command spec
:interface "USB"
:usbid "0x04b8" "0x011b"
@@ -704,7 +778,7 @@
:model "Perfection 3170 PHOTO"
:interface "USB"
:usbid "0x04b8" "0x0116"
-:status :complete
+:status :good
:comment "overseas version of the GT-9400UF<br>requires a DFSG non-free module"
:model "Perfection 3200 PHOTO" ; command spec
@@ -734,7 +808,7 @@
:model "Perfection 4490 PHOTO"
:interface "USB"
:usbid "0x04b8" "0x0119"
-:status :complete
+:status :good
:comment "overseas version of the GT-X750<br>requires a DFSG non-free module"
:model "Perfection 4870 PHOTO" ; command spec
@@ -749,6 +823,23 @@
:status :good
:comment "overseas version of the GT-X800<br>IEEE1394 untested<br>film area guide mode not supported"
+:model "Perfection 4990 Pro"
+:interface "USB IEEE1394"
+:status :untested
+:comment "seems to be a 4990 PHOTO with additional software"
+
+:model "Perfection V700"
+:interface "USB IEEE1394"
+:usbid "0x04b8" "0x012c"
+:status :good
+:comment "overseas version of the GT-X900<br>IEEE1394 untested"
+
+:model "Perfection V750"
+:interface "USB IEEE1394"
+:usbid "0x04b8" "0x012c"
+:status :good
+:comment "overseas version of the GT-X900<br>IEEE1394 untested"
+
:model "Stylus CX1500" ; Australia
:interface "USB"
:status :unsupported
@@ -757,199 +848,282 @@
:model "Stylus CX3100"
:interface "USB"
:usbid "0x04b8" "0x0802"
-:status :untested ; :good
+:status :good
:comment "overseas version of the CC-570<br>all-in-one"
:model "Stylus CX3200"
:interface "USB"
:usbid "0x04b8" "0x0802"
-:status :untested ; :good
+:status :good
:comment "overseas version of the CC-570<br>all-in-one"
:model "Stylus CX3500" ; Australia
:interface "USB"
:usbid "0x04b8" "0x080e"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus CX3600" ; UK
:interface "USB"
:usbid "0x04b8" "0x080e"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus CX3650" ; France
:interface "USB"
:usbid "0x04b8" "0x080e"
-:status :unsupported
+:status :good
:comment "all-in-one"
:model "Stylus CX3700"
:interface "USB"
:usbid "0x04b8" "0x0818"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus CX3800"
:interface "USB"
:usbid "0x04b8" "0x0818"
-:status :complete
+:status :good
+:comment "all-in-one"
+
+:model "Stylus CX3810"
+:interface "USB"
+:status :untested
+:comment "all-in-one"
+
+:model "Stylus CX4100"
+:interface "USB"
+:usbid "0x04b8" "0x0820"
+:status :good
+:comment "all-in-one"
+
+:model "Stylus CX4200"
+:interface "USB"
+:usbid "0x04b8" "0x0820"
+:status :good
:comment "all-in-one"
:model "Stylus CX4500"
:interface "USB"
:usbid "0x04b8" "0x080d"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus CX4600"
:interface "USB"
:usbid "0x04b8" "0x080d"
-:status :complete
+:status :good
:comment "all-in-one"
+:model "Stylus CX4700"
+:interface "USB"
+:usbid "0x04b8" "0x0819"
+:status :good
+:comment "all-in-one<br>overseas version of the PX-A650"
+
+:model "Stylus CX4800"
+:interface "USB"
+:usbid "0x04b8" "0x0819"
+:status :good
+:comment "all-in-one<br>overseas version of the PX-A650"
+
:model "Stylus CX5100"
:interface "USB"
:usbid "0x04b8" "0x0801"
-:status :complete
+:status :good
:comment "overseas version of the CC-600PX<br>all-in-one"
:model "Stylus CX5200"
:interface "USB"
:usbid "0x04b8" "0x0801"
-:status :complete
+:status :good
:comment "overseas version of the CC-600PX<br>all-in-one"
:model "Stylus CX5300"
:interface "USB"
:usbid "0x04b8" "0x0801"
-:status :complete
+:status :good
:comment "overseas version of the CC-600PX<br>all-in-one"
:model "Stylus CX5400"
:interface "USB"
:usbid "0x04b8" "0x0801"
-:status :complete
-:comment "overseas version of the CC-600PX<br>all-in-one"
+:status :good
+:comment "overseas version of the CC-600PX<br>all-in-one<br>epson backend claims 0x0808 USB product ID"
+
+:model "Stylus CX5700F"
+:interface "USB"
+:comment "all-in-one"
+
+:model "Stylus CX5800F"
+:interface "USB"
+:comment "all-in-one"
:model "Stylus CX6300"
:interface "USB"
:usbid "0x04b8" "0x0805"
-:status :complete
-:comment "all-in-one"
+:status :good
+:comment "all-in-one<br>mistakenly thinks its a PX-A650"
:model "Stylus CX6400"
:interface "USB"
:usbid "0x04b8" "0x0805"
-:status :complete
-:comment "all-in-one"
+:status :good
+:comment "all-in-one<br>mistakenly thinks its a PX-A650"
:model "Stylus CX6500"
:interface "USB"
:usbid "0x04b8" "0x0805"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus CX6600"
:interface "USB"
:usbid "0x04b8" "0x0805"
-:status :complete
+:status :good
+:comment "all-in-one"
+
+:model "Stylus CX6600"
+:interface "USB"
+:usbid "0x04b8" "0x0813"
+:status :good
:comment "all-in-one"
:model "Stylus CX7700"
:interface "USB"
:usbid "0x04b8" "0x081f"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus CX7800"
:interface "USB"
:usbid "0x04b8" "0x081f"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus DX3800"
:interface "USB"
:usbid "0x04b8" "0x0818"
-:status :complete
+:status :good
:comment "all-in-one"
+:model "Stylus DX3850"
+:interface "USB"
+;:usbid "0x04b8" "0x0818"
+:status :good
+:comment "all-in-one"
+
+:model "Stylus DX4200"
+:interface "USB"
+:usbid "0x04b8" "0x0820"
+:status :good
+:comment "all-in-one"
+
+:model "Stylus DX4800"
+:interface "USB"
+:usbid "0x04b8" "0x0819"
+:status :good
+:comment "all-in-one<br>overseas version of the PX-A650"
+
+:model "Stylus DX4850"
+:interface "USB"
+:usbid "0x04b8" "0x0819"
+:status :good
+:comment "DX4800 + card reader<br>all-in-one"
+
:model "Stylus Photo RX420"
:interface "USB"
:usbid "0x04b8" "0x080f"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus Photo RX425" ; France
:interface "USB"
:usbid "0x04b8" "0x080f"
-:status :unsupported
+:status :good
:comment "all-in-one"
:model "Stylus Photo RX430" ; Australia
:interface "USB"
:usbid "0x04b8" "0x080f"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus Photo RX500"
:interface "USB"
:usbid "0x04b8" "0x0807"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus Photo RX510"
:interface "USB"
:usbid "0x04b8" "0x0807"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus Photo RX520"
:interface "USB"
:usbid "0x04b8" "0x081a"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus Photo RX530"
:interface "USB"
:usbid "0x04b8" "0x081a"
-:status :complete
+:status :good
:comment "all-in-one"
:model "Stylus Photo RX600"
:interface "USB"
:usbid "0x04b8" "0x0806"
-:status :complete
+:status :good
:comment "overseas version of the PM-A850<br>all-in-one"
:model "Stylus Photo RX610"
:interface "USB"
:usbid "0x04b8" "0x0806"
-:status :complete
+:status :good
:comment "overseas version of the PM-A850<br>all-in-one"
:model "Stylus Photo RX620"
:interface "USB"
:usbid "0x04b8" "0x0811"
-:status :complete
+:status :good
:comment "overseas version of the PM-A870<br>all-in-one"
:model "Stylus Photo RX630"
:interface "USB"
:usbid "0x04b8" "0x0811"
-:status :complete
+:status :good
:comment "overseas version of the PM-A870<br>all-in-one"
+:model "Stylus Photo RX640"
+:interface "USB"
+:usbid "0x04b8" "0x081c"
+:status :good
+:comment "all-in-one<br>overseas version of the PM-A890"
+
+:model "Stylus Photo RX650"
+:interface "USB"
+:usbid "0x04b8" "0x081c"
+:status :good
+:comment "all-in-one<br>overseas version of the PM-A890"
+
:model "Stylus Photo RX700"
:interface "USB"
:usbid "0x04b8" "0x0810"
-:status :complete
+:status :good
:comment "overseas version of the PM-A900<br>all-in-one"
:model "Stylus Scan 2000"
-:status :unsupported
+:interface "USB"
+:usbid "0x04b8" "0x0105"
+:status :untested
+:comment "apparently mostly the same as the Stylus Scan 2500"
:model "Stylus Scan 2500"
:interface "USB"
:usbid "0x04b8" "0x0106"
:status :untested
+:comment "scanner is apparently a GT-7000"
-------------- next part --------------
--- ../../epson-1.26.desc 2006-06-15 16:43:51.000000000 +0900
+++ doc/epson.desc 2006-06-20 10:24:45.000000000 +0900
@@ -278,5 +278,5 @@
:model "CX-6600"
:interface "USB"
-:usbid "0x04b8" "0x0103"
+:usbid "0x04b8" "0x0805"
:status :good
More information about the sane-devel
mailing list