[sane-devel] Canon MP450
Farvil
farvil81 at yahoo.fr
Wed Mar 22 18:02:26 UTC 2006
Hi Jose !
I have a canon MP150 and Christopher Albert suggested me to have a look
at http://cmp750.berlios.de/ and to compare my usbsnoop-logs with his
logs in order to see if there is something common between the MP150 and
the MP750.
At this time, I just captured logs with usbsnoop, but I didn't took the
time to compare them with Christopher' logs (as I am not familiar with
the USB protocol).
Best regards
Farvil
Jose Juan Iglesias Rebollo a écrit :
> Hi all!
>
> I'd like to contribute to SANE by writing a back-end for my Canon
> Pixma MP450 -well..., for all of them-. I've just started
> sniffing the USB traffic, I've got some ideas and limited knowledge,
> mainly about scanning protocols.
>
> As you certainly know, the Canon MP450 is one of those multifunction
> printers with scanner that can operate to some extent without
> a PC. It can initiate the scanning process in several ways:
>
> Scan and open the image with an application.
> Scan and store the image in the PC in jpg.
> in PDF.
> Scan and send the image via e-mail.
>
> My intention, as a first stage, would be to write a back-end that
> receives the image scanned by the MP450 and decides which action
> to perform over the image. I assume that the MP450 doesn't convert the
> scanned image to, i.e., PDF. Is there any existing back-end with this
> kind of behaviour?
>
> I've seen that Christopher Albert is already working in a back-end for
> the MP750. Maybe both printers use the same protocol and should be
> supported
> by the same back-end. I've already asked him to translate his notes to
> English.
>
> Any help would be appreciated!!
>
> Kind regards.
>
___________________________________________________________________________
Nouveau : téléphonez moins cher avec Yahoo! Messenger. Appelez le monde entier à partir de 0,012 /minute !
Téléchargez sur http://fr.messenger.yahoo.com
More information about the sane-devel
mailing list