[sane-devel] HP scanjet 2300c

[Michael Schachtebeck]

Hi,

I'm trying to get my HP scanjet 2300c working under gentoo linux. I
tried sane-backends 1.0.16 and sane-backends 1.0.17, but it does not work.

According to http://www.sane-project.org/sane-backends.html#S-GENESYS,
this scanner should be supported.

When I try to scan an image, it starts scanning, but the head does not
stop, but makes an ugly noise until I pull the plug.

Is this a known problem for the developers? I found some reports on this
using google, but no solution so far... :-(

I've appended the output of lsusb -v and scanimage -L to the end of this
mail - if you need some more information, please ask.

Cheers,

Michael.



output of lsusb -v:
===================

Bus 005 Device 002: ID 03f0:0901 Hewlett-Packard ScanJet 2300c
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x0901 ScanJet 2300c
  bcdDevice            1.00
  iManufacturer           1 Hewlett-Packard
  iProduct                2 hp scanjet scanner
  iSerial                12 CN26RS30HW
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower               48mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass        16
      bInterfaceSubClass      1
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval               8





output of scanimage -L:
=======================
device `genesys:libusb:005:002' is a Hewlett Packard ScanJet 2300c
flatbed scanner