[sane-devel] HP scanjet 2300c

[m. allan noah]

there have been discussions about this problem here on the list in the 
past 2 days. try looking at the archives for a possible solution.

allan

On Fri, 5 May 2006, Michael Schachtebeck wrote:

> Hi,
>
> I'm trying to get my HP scanjet 2300c working under gentoo linux. I
> tried sane-backends 1.0.16 and sane-backends 1.0.17, but it does not work.
>
> According to http://www.sane-project.org/sane-backends.html#S-GENESYS,
> this scanner should be supported.
>
> When I try to scan an image, it starts scanning, but the head does not
> stop, but makes an ugly noise until I pull the plug.
>
> Is this a known problem for the developers? I found some reports on this
> using google, but no solution so far... :-(
>
> I've appended the output of lsusb -v and scanimage -L to the end of this
> mail - if you need some more information, please ask.
>
> Cheers,
>
> Michael.
>
>
>
> output of lsusb -v:
> ===================
>
> Bus 005 Device 002: ID 03f0:0901 Hewlett-Packard ScanJet 2300c
> Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0
>  bDeviceProtocol         0
>  bMaxPacketSize0         8
>  idVendor           0x03f0 Hewlett-Packard
>  idProduct          0x0901 ScanJet 2300c
>  bcdDevice            1.00
>  iManufacturer           1 Hewlett-Packard
>  iProduct                2 hp scanjet scanner
>  iSerial                12 CN26RS30HW
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           39
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0
>    bmAttributes         0xc0
>      Self Powered
>    MaxPower               48mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           3
>      bInterfaceClass        16
>      bInterfaceSubClass      1
>      bInterfaceProtocol      0
>      iInterface              0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0040  1x 64 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x02  EP 2 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0040  1x 64 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x83  EP 3 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0001  1x 1 bytes
>        bInterval               8
>
>
>
>
>
> output of scanimage -L:
> =======================
> device `genesys:libusb:005:002' is a Hewlett Packard ScanJet 2300c
> flatbed scanner
>
>

-- 
"so don't tell us it can't be done, putting down what you don't know.
money isn't our god, integrity will free our souls" - Max Cavalera