[sane-devel] New Product

Tue May 30 13:43:10 UTC 2006

Hello,
here i post the product informations and what i did to try to have it
work unsuccesfully. I hope you can help me have it work!

--> This is the output of sane-find-scanner -v

This is sane-find-scanner from sane-backends 1.0.15

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a SCSI driver for your SCSI adapter.
  # Also you need support for SCSI Generic (sg) in your operating
system.
  # If using Linux, try "modprobe sg".

searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
found USB scanner (vendor=0x0b3c [Olivetti], product=0xa004 [Olivetti
ANY WAY bluetooth]) at libusb:001:006
  # Your USB scanner was (probably) detected. It may or may not be
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary
ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once
you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
done

--> This is the output of sane-find-scanner -v -v

<device descriptor of 0x0b3c/0xa004 at 001:006 (Olivetti Olivetti ANY
WAY bluetooth)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x0B3C
idProduct             0xA004
bcdDevice             1.00
iManufacturer         1 (Olivetti)
iProduct              2 (Olivetti ANY WAY bluetooth)
iSerialNumber         9 (OABA53200959)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         66
 bNumInterfaces       3
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             16 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    255
   bInterfaceSubClass 0
   bInterfaceProtocol 255
   iInterface         5 (ANY WAY bluetooth Scan)
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x84 (in 0x04)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
  <interface 1>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   1
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    7
   bInterfaceSubClass 1
   bInterfaceProtocol 1
   iInterface         3 (ANY WAY bluetooth Print)
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
  <interface 2>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   2
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    3
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         6 (ANY WAY bluetooth HID)
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    32
    bInterval         200 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
    this is not a GT-6816 (bNumInterfaces = 0x3)
    checking for GT-8911 ...
    this is not a GT-8911 (check 5, bNumEndpoints = 1)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bDeviceClass = 0)
    checking for MA-1509 ...
    this is not a MA-1509 (bDeviceClass = 0)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bNumEndpoints = 1)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL646_HP ...
    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL841 ...
    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for ICM532B ...
    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass =
255)
<Couldn't determine the type of the USB chip>

At this point i need you help to determine what i have to do once i used
usbsnoop to capture the logs from windows!!!
Please, be very clear, as i am totally ignorant on the argument!

Thanks for the help.
Diego