[sane-devel] Epson GT-12000 SCSI scanner

[Dr. Karl Kashofer]

Hi !

> >> beka at beka-desktop:~/Karl_Admin$ cat /proc/scsi/scsi
> >> Attached devices:
> >> Host: scsi1 Channel: 00 Id: 00 Lun: 00
> >>   Vendor: EPSON    Model: Stylus Storage   Rev: 1.00
> >>   Type:   Direct-Access                    ANSI SCSI revision: 02
>
> Hmm, "Stylus Storage" ???
>
> >> [snip]
[snip]

> Indeed, it's an EPSON Stylus CX4900/CX5000/DX5000.  That model has a
> slot for storage media.  Storage media is typically handled as a SCSI
> device under Linux.  Are you sure your GT-12000 is detected?

No I'm not. As the other Epson printer is connected to the USB port I did not 
think it would cause problems. Your suggestion sounds highly reasonable 
though.

> Unplug the USB device and have another look at your SCSI information.
> I expect that nothing shows up anymore.  If that's the case, the
> problem is before the backend and you should be looking at your SCSI
> card first.

Thanks for this ! I will check asap. Unfortunately I am not physically in 
front of the machine, its my mum's at the other end of the country. :(

I have no experience with SCSI, any pointers ?

Cheers,
Karl