[sane-devel] Formulardaten

[cgi-mailer at kundenserver.de]

===========================================
== Neuer Eintrag
===========================================

      
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------

1. Your email address:
   'wiezeboe at orange.nl'
2. Manufacturer (e.g. "Mustek"):
   'Canon'
3. Model name (e.g. ScanExpress 1200UB):
   'Canoscan D646U'
4. Bus type:
   'USB'
5. Vendor id (e.g. 0x001):
   '0x04a9'
6. Product id (e.g. 0x0002):
   '0x220b'
7. Chipset (e.g. lm9831):
   ''
8. Comments (e.g. similar to Mustek 1234):
   'sane-find-scanner finds it, but scanimage doesn't.'
9. Data (e.g. sane-find-scanner -v -v):
   '<device descriptor of 0x04a9/0x220b at 003:003 (Canon CanoScan)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       8
idVendor              0x04A9
idProduct             0x220B
bcdDevice             0.07
iManufacturer         5 (Canon)
iProduct              6 (CanoScan)
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         32
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             48 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      2
   bInterfaceClass    16
   bInterfaceSubClass 1
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 16)
    checking for GT-8911 ...
    this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 16)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 16)
    checking for MA-1015 ...
    this is not a MA-1015 (bDeviceClass = 0)
    checking for MA-1509 ...
    this is not a MA-1509 (bDeviceClass = 0)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 16)
    checking for GL646 ...
    this is not a GL646 (bNumEndpoints = 2)
    checking for GL646_HP ...
    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 16)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 16)
    checking for GL841 ...
    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 16)
    checking for ICM532B ...
    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 16)
    checking for PV8630/LM9830 ...
    this is not a PV8630/LM9830 (bcdUSB = 0x110)
    checking for M011 ...
    this is not a M011 (bDeviceClass = 0)
    checking for RTS8822L-01H ...
    this is not a RTS8822L-01H (bNumEndpoints = 2)
    checking for rts8858c ...
    this is not a rts8858c (bNumEndpoints = 2)
    checking for SQ113 ...
    this is not a SQ113 (bcdUSB = 0x110)
<Couldn't determine the type of the USB chip (result from sane-backends 1.0.18)>

found USB scanner (vendor=0x04a9 [Canon], product=0x220b [CanoScan]) at libusb:003:003

<device descriptor of 0x0000/0x0000 at 003:001 (Linux 2.6.20-16-generic uhci_hcd UHCI Host Controller)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          9
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x0000
idProduct             0x0000
bcdDevice             2.06
iManufacturer         3 (Linux 2.6.20-16-generic uhci_hcd)
iProduct              2 (UHCI Host Controller)
iSerialNumber         1 (0000:00:10.2)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         25
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    9
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    2
    bInterval         255 ms
    bRefresh          0
    bSynchAddress     0'