[sane-devel] HP DeskJet F380 all-in-one and sane

[Johannes Meixner]

Hello,

On Aug 14 21:09 Kemal Kilic wrote (shortened):
> OpenSUSE LINUX 10.0
> HP DeskJet F380

HP all-in-one devices are supported by HPLIP, see
http://hplip.sourceforge.net

Suse Linux 10.0 includes HPLIP version 0.9.4 but according to
http://hplip.sourceforge.net/supported_devices/combined.html
at least version 0.9.9 is required.

I provide for testing HPLIP version 1.6.6a for Suse Linux 10.0
for 32-bit Intel compatible (i586) and 64-bit AMD (x86_64) via
ftp://ftp.suse.com/pub/people/jsmeix/unsupported/hplip/10.0/RPMS

I provide for testing HPLIP 2.7.7 for the released openSUSE 10.2
and Suse Linux 10.1 and Suse Linux Enterprise 10 (SLE 10)
and for the openSUSE development version openSUSE "factory"
for 32-bit Intel compatible (i586) and 64-bit AMD (x86_64)
via the openSUSE build service at
http://software.opensuse.org/download/home:/jsmeix/

The packages are
* only for testing
* without any guarantee or warranty
* without any support 

As an extreme example, this means that if your complete computer center
crashes because of these packages, it is only your problem.

You need the HPLIP service to be up and running.
Therefore do (as root):
  insserv hplip
  rccups stop
  rchplip restart
  rccups start

Then set up your device using HP's tool "hp-setup" for printing
and for scanning activate the "hpaio" backend in /etc/sane.d/dll.conf,
see
http://en.opensuse.org/SDB:Configuring_Scanners_from_SUSE_LINUX_9.2


Kind Regards
Johannes Meixner
-- 
SUSE LINUX Products GmbH, Maxfeldstrasse 5, 90409 Nuernberg, Germany
AG Nuernberg, HRB 16746, GF: Markus Rex