[sane-devel] Visioneer Problems

[Robin Stewart]

I ran /sane-find-scanner -q and now realise that the Visioneer XP 450 
does not have the gt6801 or 6816 chip. I have a printer that also has a 
combined scanner and it was that which was giving the results so powered 
it off.

Xsane /run with only the visioneer scanner reports No devices available.

I believe that the Visioneer Xp 450 is part of the avision package.

I ran the following commands:

1. robin at robin-desktop:~$ sane-find-scanner

 
found USB scanner (vendor=0x04a7, product=0x0424) at libusb:002:008
 
2. robin at robin-desktop:~$ scanimage -L

No scanners were identified.

//3. SANE_DEBUG_AVISION=7 scanimage -L

Produces:

[sanei_debug] Setting debug level of avision to 7.
[avision] sane_init:(Version: 1.0 Build: 201)
[avision] sane_init: parsing config line "# This are the possible 
options. Normally any scanner"
[avision] sane_init: config file line 1: ignoring comment line
[avision] sane_init: parsing config line "# should work just fine 
without them - and they are only"
[avision] sane_init: config file line 2: ignoring comment line
[avision] sane_init: parsing config line "# needed for test and 
debugging. So if you experience problems"
[avision] sane_init: config file line 3: ignoring comment line
[avision] sane_init: parsing config line "# and you solve them with 
enabling options here, please notify"
[avision] sane_init: config file line 4: ignoring comment line
[avision] sane_init: parsing config line "# the SANE/Avision maintainer: 
Rene Rebe <rene at exactcode.de>"
[avision] sane_init: config file line 5: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 6: ignoring empty line
[avision] sane_init: parsing config line "#option disable-gamma-table"
[avision] sane_init: config file line 7: ignoring comment line
[avision] sane_init: parsing config line "#option disable-calibration"
[avision] sane_init: config file line 8: ignoring comment line
[avision] sane_init: parsing config line "#option force-a4"
[avision] sane_init: config file line 9: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 10: ignoring empty line
[avision] sane_init: parsing config line "#scsi AVISION"
[avision] sane_init: config file line 11: ignoring comment line
[avision] sane_init: parsing config line "#scsi FCPA"
[avision] sane_init: config file line 12: ignoring comment line
[avision] sane_init: parsing config line "#scsi MINOLTA"
[avision] sane_init: config file line 13: ignoring comment line
[avision] sane_init: parsing config line "#scsi MITSBISH MCA-S600C"
[avision] sane_init: config file line 14: ignoring comment line
[avision] sane_init: parsing config line "#scsi MITSBISH MCA-SS600"
[avision] sane_init: config file line 15: ignoring comment line
[avision] sane_init: parsing config line "#scsi HP"
[avision] sane_init: config file line 16: ignoring comment line
[avision] sane_init: parsing config line "#scsi hp"
[avision] sane_init: config file line 17: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 18: ignoring empty line
[avision] sane_init: parsing config line "#scsi /dev/scanner"
[avision] sane_init: config file line 19: ignoring comment line
[avision] sane_init: parsing config line "# usb libusb:002:003"
[avision] sane_init: config file line 20: ignoring comment line
[avision] sane_init: parsing config line "# usb 0x03f0 0x0701"
[avision] sane_init: config file line 21: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 22: ignoring empty line
[avision] sane_init: parsing config line "#added to read the visioneer 
strobe xp 450"
[avision] sane_init: config file line 23: ignoring comment line
[avision] sane_init: parsing config line "#addresses found from 
sane-find-scanner"
[avision] sane_init: config file line 24: ignoring comment line
[avision] sane_init: parsing config line "#usb libush:001:006"
[avision] sane_init: config file line 25: ignoring comment line
[avision] sane_init: parsing config line "usb 0x04a7 0x0424"
[avision] sane_init: config file line 26: trying to attach USB:`usb 
0x04a7 0x0424'
[avision] attach:
[avision] attach: opening libusb:002:008
[avision] inquiry: 96
[avision] attach: sending INQUIRY
[avision] filling command to have a length of 10, was: 6
[avision] Timeouts: write: 30000, read: 1500, status: 1500
[avision] avision_usb_status: timeout 1500, 1 retries
[avision] ==> (bulk read) going down ...
[avision] <== (bulk read) got: 1, status: 0
[avision] attach: Inquiry gives mfg=VISIONER, model=Strobe XP 450, 
product revision=1.02.
[avision] attach: model is not in the list of supported models!
[avision] attach: You might want to report this output.
[avision] attach: To: rene at exactcode.de (the Avision backend author)
[avision] sane_init: Trying to find USB device 638 a27 ...
[avision] sane_init: Trying to find USB device 638 a3c ...
[avision] sane_init: Trying to find USB device 638 a33 ...
[avision] sane_init: Trying to find USB device 638 a24 ...
[avision] sane_init: Trying to find USB device 638 a25 ...
[avision] sane_init: Trying to find USB device 638 a3a ...
[avision] sane_init: Trying to find USB device 638 a23 ...
[avision] sane_init: Trying to find USB device 638 a2a ...
[avision] sane_init: Trying to find USB device 638 a2a ...
[avision] sane_init: Trying to find USB device 638 a19 ...
[avision] sane_init: Trying to find USB device 638 a41 ...
[avision] sane_init: Trying to find USB device 638 a16 ...
[avision] sane_init: Trying to find USB device 638 a13 ...
[avision] sane_init: Trying to find USB device 638 a18 ...
[avision] sane_init: Trying to find USB device 638 a66 ...
[avision] sane_init: Trying to find USB device 638 a40 ...
[avision] sane_init: Trying to find USB device 638 a68 ...
[avision] sane_init: Trying to find USB device 638 a61 ...
[avision] sane_init: Trying to find USB device 638 a45 ...
[avision] sane_init: Trying to find USB device 3f0 701 ...
[avision] sane_init: Trying to find USB device 3f0 701 ...
[avision] sane_init: Trying to find USB device 3f0 801 ...
[avision] sane_init: Trying to find USB device 3f0 b01 ...
[avision] sane_init: Trying to find USB device 638 26a ...
[avision] sane_init: Trying to find USB device 686 4004 ...
[avision] sane_init: Trying to find USB device 686 400d ...
[avision] sane_init: Trying to find USB device 686 400e ...
[avision] sane_init: Trying to find USB device 638 a15 ...
[avision] sane_init: Trying to find USB device 638 a16 ...
[avision] sane_init: Trying to find USB device 4c5 1029 ...
[avision] sane_init: Trying to find USB device 40a 6001 ...
[avision] sane_init: Trying to find USB device 40a 6002 ...
[avision] sane_init: Trying to find USB device 40a 6003 ...
[avision] sane_init: Trying to find USB device 40a 6004 ...
[avision] sane_init: Trying to find USB device 40a 6005 ...
[avision] sane_init: Trying to find USB device 638 268 ...
[avision] sane_init: Trying to find USB device 4a7 449 ...
[avision] sane_init: Trying to find USB device 4a7 44c ...
[avision] sane_init: Trying to find USB device 4a7 475 ...
[avision] sane_get_devices:

No scanners were identified.
//

Can you suggest what I should do next?

//


----------------------------------------------------------------------
Free pop3 email with a spam filter.
http://www.bluebottle.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20070604/833973dd/attachment.htm