[sane-devel] Avision scanner

[Robin Stewart]

Using  sudo gedit /etc/sane.d/avision.conf I have just removed  the 
line. I then run
scanimage -L and unfortunately no scanners were identified.

Robin

The above comments are in response to m. allan noah's email of 07/05/07 
12:17 as quoted below:
> drop the libusb line from the file, you likely only need the vid/pid
> line. then run the same debug test as before. lets make sure the
> backend reads the file properly and looks for the scanner.
>
> allan
>
> On 5/7/07, Robin Stewart <s48264 at bluebottle.com> wrote:
>> This is the avision.conf file as just adjusted by me. After the
>> adjustment the scanner is still not being found by sane:
>>
>> > #option disable-gamma-table

----------------------------------------------------------------------
Get a free email address with REAL anti-spam protection.
http://www.bluebottle.com