[sane-devel] Avision scanner

[m. allan noah]

"...then run the same debug test as before..."

allan

On 5/7/07, Robin Stewart <s48264 at bluebottle.com> wrote:
> Using  sudo gedit /etc/sane.d/avision.conf I have just removed  the
> line. I then run
> scanimage -L and unfortunately no scanners were identified.
>
> Robin
>
> The above comments are in response to m. allan noah's email of 07/05/07
> 12:17 as quoted below:
> > drop the libusb line from the file, you likely only need the vid/pid
> > line. then run the same debug test as before. lets make sure the
> > backend reads the file properly and looks for the scanner.
> >
> > allan
> >
> > On 5/7/07, Robin Stewart <s48264 at bluebottle.com> wrote:
> >> This is the avision.conf file as just adjusted by me. After the
> >> adjustment the scanner is still not being found by sane:
> >>
> >> > #option disable-gamma-table
>
> ----------------------------------------------------------------------
> Get a free email address with REAL anti-spam protection.
> http://www.bluebottle.com
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org
>


-- 
"The truth is an offense, but not a sin"