[sane-devel] Fujitsu fi-60F small document scanner

[m. allan noah]

well, you are the first person to report having one, so you are going
to have to provide whatever extra info there is :) as root:

SANE_DEBUG_FUJITSU=30 scanimage --help 2>fi60.log

and send me fi60.log directly.

btw- you have doppler misspelled several times on your website...

allan

On 5/7/07, Rob Shortt <rob at tvcentric.com> wrote:
> Hello,
>
> We have a Fujitsu fi-60F scanner that we would very much like to have
> working in linux.  This is a small document (A6) flatbed scanner and I
> believe is the only one of its kind.
>
> The system I'm testing on is FC5 with kernel 2.6.20 with SANE 1.0.18.
>
> The product ID for this device is 0x10c7.  I added this to
> /etc/sane.d/fujitsu.conf:
>
> #fi-60F
> usb 0x04c5 0x10c7
>
> Running sane-find-scanner shows:
>
> found USB scanner (vendor=0x04c5, product=0x10c7) at libusb:001:004
> # Your USB scanner was (probably) detected. It may or may not be
> supported by
> # SANE. Try scanimage -L and read the backend's manpage.
>
>
> However, scanimage -L reports that no scaners were identified (even with
> -d libusb:001:004).
>
> I have tried the scanDoX fujitsu driver and that doesn't work either.  I
> would rather an open source solution anyways.
>
> According to the comments here
> http://www.sane-project.org/sane-mfgs.html#Z-FUJITSU the fi-60F is:
> "untested - workgroup, current, unknown chipset, perhaps non-fujitsu".
> Does anyone have some insight on this device? What should my next step
> be in supporting this scanner?
>
> Thanks,
> -Rob
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org
>


-- 
"The truth is an offense, but not a sin"