[sane-devel] Fujitsu fi-60F small document scanner

[Rob Shortt]

Hello,

We have a Fujitsu fi-60F scanner that we would very much like to have 
working in linux.  This is a small document (A6) flatbed scanner and I 
believe is the only one of its kind.

The system I'm testing on is FC5 with kernel 2.6.20 with SANE 1.0.18.

The product ID for this device is 0x10c7.  I added this to 
/etc/sane.d/fujitsu.conf:

#fi-60F
usb 0x04c5 0x10c7

Running sane-find-scanner shows:

found USB scanner (vendor=0x04c5, product=0x10c7) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be 
supported by
# SANE. Try scanimage -L and read the backend's manpage.


However, scanimage -L reports that no scaners were identified (even with 
-d libusb:001:004).

I have tried the scanDoX fujitsu driver and that doesn't work either.  I 
would rather an open source solution anyways.

According to the comments here 
http://www.sane-project.org/sane-mfgs.html#Z-FUJITSU the fi-60F is: 
"untested - workgroup, current, unknown chipset, perhaps non-fujitsu". 
Does anyone have some insight on this device? What should my next step 
be in supporting this scanner?

Thanks,
-Rob