[sane-devel] Adding Scanner to Backend Configuration

[Hugh McMaster]

Hi Gerald,

On 12/05/07, Gerald Murray wrote:
> The chipset in the Canon Lide 70 is not yet known, but it did not respond
> positively to gl841 or gl646, so it is will not at present work with the
> genesys backend.  It has only 2 bulk endpoints, but no isosynchronous
> endpoint, so it is different.  Some work is required to identify the chip,
> and the protocol.  Using usbsnoop on a small scan may provide helpful
> information.  In any case, quite a bit of work lies between now and a
> successful sane scan.  I suggest obtaining a usbsnoop log and/or identifying
> the chipset.  The recompile is not likely to work or provide useful
> information,
> in my humble opinion.  Someone needs to initiage and carry that project
> forward into development.

Thankyou for your reply.  I'll look into obtaining a log for the scanner.

Hugh