[sane-devel] Formulardaten

[cgi-mailer at kundenserver.de]

===========================================
== Neuer Eintrag
===========================================

      
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------

1. Your email address:
   'aikishugyo at gmail.com'
2. Manufacturer (e.g. "Mustek"):
   'Canon'
3. Model name (e.g. ScanExpress 1200UB):
   'Canoscan 8800F'
4. Bus type:
   'USB'
5. Vendor id (e.g. 0x001):
   '0x04a9'
6. Product id (e.g. 0x0002):
   '0x1901'
7. Chipset (e.g. lm9831):
   'unknown'
8. Comments (e.g. similar to Mustek 1234):
   'Canon installation of drivers under Windows appears to give the driver a name of CNQ4805. At least one of the DLLs is named like that, as is the directory under c:\windows\twain_32 where a lot of DLLs and DAT files are kept.'
9. Data (e.g. sane-find-scanner -v -v):
   'output of "sane-find-scanner -v -v"
=======================
(omitted not-found lines)
..
trying libusb:

<device descriptor of 0x04a9/0x1901 at 004:023 (Canon CanoScan)>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x04A9
idProduct             0x1901
bcdDevice             1.01
iManufacturer         1 (Canon)
iProduct              2 (CanoScan)
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             2 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    255
   bInterfaceSubClass 0
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x07 (out 0x07)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x88 (in 0x08)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x89 (in 0x09)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    64
    bInterval         11 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
    this is not a GT-6816 (bcdUSB = 0x200)
    checking for GT-8911 ...
    this is not a GT-8911 (check 2, bcdUSB = 0x200)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bDeviceClass = 0)
    checking for MA-1509 ...
    this is not a MA-1509 (bDeviceClass = 0)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bcdUSB = 0x200)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL646_HP ...
    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL84x ...
    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for ICM532B ...
    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
    checking for PV8630/LM9830 ...
    this is not a PV8630/LM9830 (bcdUSB = 0x200)
    checking for M011 ...
    this is not a M011 (bDeviceClass = 0)
    checking for RTS8822L-01H ...
    this is not a RTS8822L-01H (bEndpointAddress = 0x7, bmAttributes = 0x2, wMaxPacketSize = 0x200, bInterval = 0x0)
    checking for rts8858c ...
    this is not a rts8858c (bcdUSB = 0x200)
    checking for SQ113 ...
    this is not a SQ113 (bInterfaceSubClass = 0)
    checking for HP5550/5590/7650 chipset ...
    this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
    checking for rts8801/rts8891 ...
    this is not a rts8801/rts8891 (bcdUSB = 0x200)
<Couldn't determine the type of the USB chip (result from sane-backends 1.0.18-cvs)>

found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:004:023

  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
done

'