[sane-devel] fujitsu fi-5120c fail on scan after cancel a job

[m. allan noah]

Well, it took me a month, but last night i released an updated fujitsu
driver into sane cvs. It contains, among other things, proper
cancelling support. I dont have many different models, so testing has
been somewhat limited. Feedback would be most welcome.

allan

On Wed, Mar 19, 2008 at 3:19 PM, m. allan noah <kitno455 at gmail.com> wrote:
> i am not surprised. i dont think i ever got canceling to work right.
>  i'll take a look at it. BTW- how many scanners do you own :)
>
>  allan
>
>
>
>  On Wed, Mar 19, 2008 at 3:07 PM, tobias alarcon <extobias at gmail.com> wrote:
>  > Hi all,
>  >
>  >  iam having a problem with this scanner.
>  >  Everthing goes fine on scanning, but when a try to scan
>  >  after calling sane_cancel() can't open the scanner
>  >
>  >  this is what debur say
>  >
>  >  [fujitsu] sane_start: start
>  >  [fujitsu] scanner_control: start
>  >  [fujitsu] do_usb_cmd: start
>  >  [fujitsu] do_usb_cmd: finish
>  >  [fujitsu] scanner_control: finish
>  >  [fujitsu] calculateDerivedValues: start
>  >  [fujitsu] xres=200, tlx=0, brx=10224, pw=10200, maxx=10624
>  >  [fujitsu] yres=200, tly=0, bry=13200, ph=13200, maxy=40800
>  >  [fujitsu] xres=200, tlx=0, brx=10224, pw=10200, maxx=10624
>  >  [fujitsu] yres=200, tly=0, bry=13200, ph=13200, maxy=40800
>  >  [fujitsu] calculateDerivedValues: finish
>  >  [fujitsu] setup_buffers: start
>  >  [fujitsu] setup_buffers: finish
>  >  [fujitsu] set_window: start
>  >  [fujitsu] do_usb_cmd: start
>  >  [fujitsu] do_usb_cmd: finish
>  >  [fujitsu] set_window: finish
>  >  [fujitsu] object_position: start
>  >  [fujitsu] do_usb_cmd: start
>  >  [fujitsu] do_usb_cmd: finish
>  >  [fujitsu] wait_scanner: start
>  >  [fujitsu] do_usb_cmd: start
>  >  [fujitsu] do_usb_cmd: finish
>  >  [fujitsu] wait_scanner: finish
>  >  [fujitsu] object_position: finish
>  >  [fujitsu] start_scan: start
>  >  [fujitsu] do_usb_cmd: start
>  >  [fujitsu] do_usb_cmd: start
>  >  [fujitsu] do_usb_cmd: finish
>  >  [fujitsu] sense_handler: start
>  >  [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1, ILI=0, info=00000000
>  >  [fujitsu] Illegal request: invalid field in parm list
>  >  [fujitsu] Offending byte is 00
>  >  [fujitsu] start_scan: finish
>  >  [fujitsu] sane_start: ERROR: cannot start_scan
>  >  [fujitsu] do_cancel: start
>  >  [fujitsu] do_cancel: finish
>  >
>  >  and return from sane_start with SANE_STATUS_INVAL
>  >  but i don't change anything from before scan parameters
>  >
>  >  thanks in advance
>  >
>  >  Tobias.
>  >
>  >  --
>  >  sane-devel mailing list: sane-devel at lists.alioth.debian.org
>  >  http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>  >  Unsubscribe: Send mail with subject "unsubscribe your_password"
>  >              to sane-devel-request at lists.alioth.debian.org
>  >
>
>
>
>  --
>  "The truth is an offense, but not a sin"
>



-- 
"The truth is an offense, but not a sin"