[sane-devel] Mustek ScanExpress A3 600 USB Pro

[Daniel Stender]

Gerard Klaver wrote:

> On Tue, 2008-01-08 at 21:39 +0100, Julien BLACHE wrote:
>> Daniel Stender <uzstzm at uni-bonn.de> wrote:
>>> Please can you please help me install the new scanner:
>>>
>>> found USB scanner (vendor=0x055f [Hewlett-Packard.        ], product=0x040b [USB2.0 Scanner            ], chip=SQ113) at libusb:002:003

>> If this scanner is really what the subject of your mail tells, then
>> try the backend available at:
>> <http://www.meier-geinitz.de/sane/mustek_a3p1-backend/>
>>
>> I think this backend supports it.
>>
>> This backend, as is, is unsupported by the SANE project. It comes from
>> Mustek, but needs a complete, clean rewrite before it's integrated in
>> SANE.

> If your device is a SQ113, check this page
> http://www.meier-geinitz.de/sane/mustek_usb2-backend/
> 
> the backend Julien mentioned supports the SQ11

Found out:

1) 0x055f 0x040b is recognized /etc/udev/rules.d/025_libsane.rules:

SYSFS{idVendor}=="055f", SYSFS{idProduct}=="040b", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"

(libsane 1.0.19~cvs20071213-1 Debian Lenny) - but scanner not recognized by scanimage -L

2) Sane supported scanners search engine:

BearPaw 6400 TA Pro USB
0x055f/0x040b
unsupported
Not supported. May be supported by mustek_usb2 backend later. See link for some information.

Looks like mustek_usb2 backend is the right choice.

But, how I get this backend working? There is no /etc/sane.d/mustek_usb2.conf

Where I can find the "offical" addev formular?

DS