[sane-devel] HP Scanjet 7800

[mdsimguy]

Has this scanner received any more attention since this last post?


goldenfish256 wrote:
> 
>    Hi,
> 
> i have HP Scanjet 7800 scanner and this scanner is not supported by sane.
> I tested avision and hp5590 backend from cvs without success.
> 
> Which backend support this scanner ?
> 
> For more information and testing, contact me.
> 
> 
> Many thanks
>    Pavel Kysilka
>      
> 
> 
> lsusb -v -d 03f0:2905 
> 
> Bus 002 Device 004: ID 03f0:2905 Hewlett-Packard 
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0 
>   bDeviceProtocol         0 
>   bMaxPacketSize0        64
>   idVendor           0x03f0 Hewlett-Packard
>   idProduct          0x2905 
>   bcdDevice            1.00
>   iManufacturer           1 
>   iProduct                2 
>   iSerial                 3 
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           39
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          4 
>     bmAttributes         0xc0
>       Self Powered
>     MaxPower                4mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol    255 Vendor Specific Protocol
>       iInterface              5 
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0004  1x 4 bytes
>         bInterval              16
> 
> 
> -- 
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org
> 
> 

-- 
View this message in context: http://www.nabble.com/HP-Scanjet-7800-tp15189713p20343445.html
Sent from the SANE - Dev mailing list archive at Nabble.com.