[sane-devel] Epson Perfection 610 Issue with 150 dpi scan

[Rainer Dorsch]

Thanks for the quick reply. I built from git, but can test only tomorrow with 
the scanner.

I am wondering if I can have two sane-backends installations in parallel while 
testing. I did a ./configure  prefix=/opt/sane-backends-091230 and then a 

rd at blackbox:~/SW.nobackup/sane-backends$ . /opt/sane-backends-091230/sane_init
rd at blackbox:~/SW.nobackup/sane-backends$ 
cat /opt/sane-backends-091230/sane_init
SANEPREFIX=/opt/sane-backends-091230
export PATH=$SANEPREFIX/bin:$PATH
export LD_LIBRARY_PATH=$SANEPREFIX/lib:$LD_LIBRARY_PATH
rd at blackbox:~/SW.nobackup/sane-backends$ 

Thanks,
Rainer

PS: I changed the subject to Epson Perfection 610 (510 was a typo)

Am Mittwoch, 30. Dezember 2009 schrieben Sie:
> Could you try a more recent version of sane-backends, or perhaps a git
> snapshot?
>
> allan
>
> On Tue, Dec 29, 2009 at 5:34 AM, Rainer Dorsch <rdorsch at web.de> wrote:
> > Hello,
> >
> > when scanning with the Epson Perfection 610 with 150dpi color mode, sane
> > creates corrupted files
> >
> > rd at dell:~$ scanimage -L
> > device `epson2:libusb:001:003' is a Epson Perfection610 flatbed scanner
> > device `epson:libusb:001:003' is a Epson Perfection610 flatbed scanner
> > device `epkowa:libusb:001:003' is a Epson Perfection 610 flatbed scanner
> > Crd at dell:~$scanimage --device-name='epson2:libusb:001:003' --mode='Color'
> > -y 297 -l 0 --resolution='150' -x 210 --wait-for-button='yes' -t 0
> > --verbose > test.pnm
> > scanimage: scanning image of size 1240x1748 pixels at 24 bits/pixel
> > scanimage: acquiring RGB frame
> > scanimage: min/max graylevel value = 34/253
> > scanimage: read 6487680 bytes in total
> > rd at dell:~$ pnmtopng test.pnm > test.png
> > pnmtopng: EOF / read error reading a row of pixels
> > rd at dell:~$
> >
> > Also imagemagick has problems with this file
> >
> > rd at dell:~$ convert test.pnm test.png
> > convert: unable to read image data `test.pnm'.
> > convert: missing an image filename `test.png'.
> > rd at dell:~$ ls -l test.pnm
> > -rw-r--r-- 1 rd rd 6487717 29. Dez 10:40 test.pnm
> > rd at dell:~$
> >
> > For reference I put the corupted file to
> >
> > http://bokomoko.de/~rd/test.pnm
> >
> > Since kuickshow displays test.pnm well (also with more meaningfull
> > examples), I think sane scans the page ok, but has some issue when
> > writting the pnm file.
> >
> > When scanning with 300 dpi in color mode or 150 dpi in binary mode, there
> > is no issue:
> >
> > rd at dell:~$ scanimage --device-name='epson2:libusb:001:003' --mode='Color'
> > -y 297 -l 0 --resolution='300' -x 210 --wait-for-button='yes' -t 0
> > --verbose > test300.pnm
> > scanimage: scanning image of size 2480x3496 pixels at 24 bits/pixel
> > scanimage: acquiring RGB frame
> > scanimage: min/max graylevel value = 19/255
> > scanimage: read 26010240 bytes in total
> > rd at dell:~$ pnmtopng test300.pnm > test300.png
> > rd at dell:~$
> >
> > Again for reference: http://bokomoko.de/~rd/test300.pnm
> >
> > I am using the sane-backends version 1.0.19 contained in Debian 5.0
> >
> > Thanks,
> > Rainer
> >
> > --
> > sane-devel mailing list: sane-devel at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> > Unsubscribe: Send mail with subject "unsubscribe your_password"
> >             to sane-devel-request at lists.alioth.debian.org



-- 
Rainer Dorsch
Lärchenstr. 6
D-72135 Dettenhausen
07157-734133
email: rdorsch at web.de
jabber: rdorsch at jabber.org
GPG Fingerprint: 5966 C54C 2B3C 42CC 1F4F  8F59 E3A8 C538 7519 141E
Full GPG key: http://pgp.mit.edu/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20091230/0704e05e/attachment-0001.pgp>