[sane-devel] HP Scanjet G2710 support in RPM-packed sane-backends

[Jacek Rużyczka]

Hi folks,

I've recently had serious trouble with getting my HP ScanJet G2710 run with 
SANE. As suggested in 
http://jkdsoftware.dyndns.org/drupal/?q=en/forums/hp3900-series/248 I used the 
hp3900 SANE backend, but sane-find-scanner does not recognize the scanner 
correctly:

found USB scanner (vendor=0x03f0 [hewlett packard], product=0x2805 [hp 
scanjet], chip=RTS8822) at libusb:004:004

I looked into the corresponding config files (hp3900.conf, usb.ids)...but 
there the G2710 was referenced with the correct USB product ID.

I am using openSUSE 11.1 x86_64 with the SANE libs in RPM form (it's a 
producttion machine so that I'm tring to use RPM-packaged programs only):

veteran:/home/jacek # rpm -q sane-backends
sane-backends-1.0.19-128.106

What is the problem? G2710 support missing in the RPM-packaged SANE backends? 
Thank you for any useful hints.

Kind regards
Jacek


----------------------------------------------------------------------
Zobacz najlepsze oferty nieruchomosci!
Sprawdz >>> http://link.interia.pl/f205d