[sane-devel] Providing the version of SANE used in VueScan

[Ed Hamrick]

My name is spelled "Hamrick" - with one "m".
It's polite to sign e-mails with one's name.

The source code to sanei_scsi.c is attached.

Of course, you're just wasting your time and
my time, which is annoying at best.  These
childish games aren't amusing for me or
for anyone reading this mailing list.

Regards,
Ed Hamrick

----- Original Message ----- 
From: <jyqvklioo at googlemail.com>
To: <edhamrick at aol.com>
Cc: <sane-devel at lists.alioth.debian.org>
Sent: Friday, January 23, 2009 10:17 AM
Subject: Providing the version of SANE used in VueScan


> Dear Mr. Hammrick,
>
> You use SANE in your VueScan software.
> One can see it by examining you program as follows:
> $ strings vuescan|fgrep -i sane
> sanei_scsi
> SANE_SG_BUFFERSIZE
> SANE_SCSICMD_TIMEOUT
> sanei_scsi.issue: %p
> sanei_scsi_req_flush_all
> sanei_scsi.c
> sanei_scsi_req_wait
> sanei_scsi_req_enter
> sanei_scsi_cmd
> sanei_scsi_open: SG driver version: %i
> sanei_scsi_open: The device found for %s does not look like a scanner
> sanei_scsi_open_extended: using %i bytes as SCSI buffer
> sanei_scsi_open: using old SG driver logic
> sanei_scsi_open: SG driver can change buffer size at run time
> sanei_scsi_open: low level command queueing enabled
> sanei_scsi_open: Host adapter queue depth: %i
> sanei_scsi_open: cannot read SG buffer size - %s
> sanei_scsi_open: The file %s is not an SG device file
> sanei_scsi_open: open of `%s' failed: %s
> sanei_scsi_open: sanei_scsi_max_request_size=%d bytes
> sanei_scsi_open: timeout value must be between 1 and 1200 seconds
> sanei_scsi_open: could not allocate SG buffer memory wanted: %i got: %i
> sanei_scsi.issue: bad write (errno=%i) %s %li
> sanei_scsi.issue: SG_BIG_BUF inconsistency? Check file PROBLEMS.
> sanei_scsi_req_enter2: ioctl to set command length failed
> sanei_scsi_req_enter: failed to malloc %lu bytes
> sanei_scsi_req_wait: waiting for %p
> sanei_scsi_req_wait: read %ld bytes
> sanei_scsi_req_wait: SCSI command complained: %s
> sanei_scsi_req_wait: read returned %ld (errno=%d)
> req == ((fdparms *) fd_info[req->fd].pdata)->sane_qhead
> sanei_scsi_find_devices: vendor=%s model=%s type=%s
> sanei_config
> SANE_CONFIG_DIR
> .:/usr/local/etc/sane.d
> sanei_config_open: attempting to open `%s'
> sanei_config_open: using file `%s'
> sanei_config_open: could not find config file `%s'
> sanei_debug
> SANE_DEBUG_
> [sanei_debug] malloc() failed
>
>
> Please, make the source code of SANE you use in your product available, as 
> you are obliged by the licensing terms of SANE.
>
> Thank you in advance.
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sanei_scsi.c
Type: application/octet-stream
Size: 165580 bytes
Desc: not available
Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20090123/092bbc3d/attachment-0001.obj