[sane-devel] Providing the version of SANE used in VueScan

[m. allan noah]

The lady doth protest too much, methinks :)

allan

2009/1/23 Ed Hamrick <EdHamrick at aol.com>:
> My name is spelled "Hamrick" - with one "m".
> It's polite to sign e-mails with one's name.
>
> The source code to sanei_scsi.c is attached.
>
> Of course, you're just wasting your time and
> my time, which is annoying at best.  These
> childish games aren't amusing for me or
> for anyone reading this mailing list.
>
> Regards,
> Ed Hamrick
>
> ----- Original Message ----- From: <jyqvklioo at googlemail.com>
> To: <edhamrick at aol.com>
> Cc: <sane-devel at lists.alioth.debian.org>
> Sent: Friday, January 23, 2009 10:17 AM
> Subject: Providing the version of SANE used in VueScan
>
>
>> Dear Mr. Hammrick,
>>
>> You use SANE in your VueScan software.
>> One can see it by examining you program as follows:
>> $ strings vuescan|fgrep -i sane
>> sanei_scsi
>> SANE_SG_BUFFERSIZE
>> SANE_SCSICMD_TIMEOUT
>> sanei_scsi.issue: %p
>> sanei_scsi_req_flush_all
>> sanei_scsi.c
>> sanei_scsi_req_wait
>> sanei_scsi_req_enter
>> sanei_scsi_cmd
>> sanei_scsi_open: SG driver version: %i
>> sanei_scsi_open: The device found for %s does not look like a scanner
>> sanei_scsi_open_extended: using %i bytes as SCSI buffer
>> sanei_scsi_open: using old SG driver logic
>> sanei_scsi_open: SG driver can change buffer size at run time
>> sanei_scsi_open: low level command queueing enabled
>> sanei_scsi_open: Host adapter queue depth: %i
>> sanei_scsi_open: cannot read SG buffer size - %s
>> sanei_scsi_open: The file %s is not an SG device file
>> sanei_scsi_open: open of `%s' failed: %s
>> sanei_scsi_open: sanei_scsi_max_request_size=%d bytes
>> sanei_scsi_open: timeout value must be between 1 and 1200 seconds
>> sanei_scsi_open: could not allocate SG buffer memory wanted: %i got: %i
>> sanei_scsi.issue: bad write (errno=%i) %s %li
>> sanei_scsi.issue: SG_BIG_BUF inconsistency? Check file PROBLEMS.
>> sanei_scsi_req_enter2: ioctl to set command length failed
>> sanei_scsi_req_enter: failed to malloc %lu bytes
>> sanei_scsi_req_wait: waiting for %p
>> sanei_scsi_req_wait: read %ld bytes
>> sanei_scsi_req_wait: SCSI command complained: %s
>> sanei_scsi_req_wait: read returned %ld (errno=%d)
>> req == ((fdparms *) fd_info[req->fd].pdata)->sane_qhead
>> sanei_scsi_find_devices: vendor=%s model=%s type=%s
>> sanei_config
>> SANE_CONFIG_DIR
>> .:/usr/local/etc/sane.d
>> sanei_config_open: attempting to open `%s'
>> sanei_config_open: using file `%s'
>> sanei_config_open: could not find config file `%s'
>> sanei_debug
>> SANE_DEBUG_
>> [sanei_debug] malloc() failed
>>
>>
>> Please, make the source code of SANE you use in your product available, as
>> you are obliged by the licensing terms of SANE.
>>
>> Thank you in advance.
>>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"