[sane-devel] Sane

[stef]

Le samedi 17 octobre 2009 03:36:21 Valéry HELENON, vous avez écrit :
> My Experience :
>
> I bought a Iriscan Experss 2 scanner.
> After several trys, I made it work and here is my confiuration
>
> File GT68xx.conf in /etc/sane.d/ :
>
> usb 0x07b3 0x045f
> override "plustek-opticslim-m12"
> firmware /usr/share/sane/gt68xx/cism216.fw
>
> I copyed the firmware file to /usr/share/sane/gt68xx/
>
> I had to play with usb permission to get it work without sudo. I changed
> the right of /dev/bus/usb/002/ witch is the usb port used by the
> scanner, making myself the new owner.
>
> The scanner work with GIMP, XSANE, GSCAN2PDF.
>
> The only thing is that I have warning messages at xsane startup :
>
> [gt68xx] WARNING: You have manually added the ids of your scanner
> [gt68xx]          to gt68xx.conf. Please use an appropriate override
> [gt68xx]          for your scanner. Use extreme care and switch off
> [gt68xx]          the scanner immediately if you hear unusual noise.
> [gt68xx]          Please report any success to
> [gt68xx]          sane-devel at lists.alioth.debian.org. Please provide as
> many
> [gt68xx]          details as possible, e.g. the exact name of your
> [gt68xx]          scanner, ids, settings etc.
>
> Is there anyway to take it out ?
>
> Many Thanks.
>
>

	Hello,

	gt68xx_devices.c must be modified to have the same entry you manually added 
in gt68xx.conf. Once the backend recompiled and installed, this message will 
go away.

Regards,
	Stef