[sane-devel] canon dr-9050c doesn't work

Luigi Carbone lg.carbone at gmail.com
Mon Dec 13 11:44:25 UTC 2010 

Ok I solved the problem of the installation, now the scanner works with 
the following commands, but only if I start xsane as root. Omitting 
this, returns this error when I start xsane from a terminal

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated

tks for help

Il 22/11/2010 12:33, m. allan noah ha scritto:
> "/usr/local/etc/sane.d/dll.d"
>
> you have two copies of sane installed, and the one in /usr/local is
> being used, but it has no config files. I would remove that copy, and
> re-configure with the proper arguments to overwrite your existing
> copy. Something like:
>
> ./configure --prefix=/usr --sysconfdir=/etc
> make
> make install
>
> allan
>
> On Mon, Nov 22, 2010 at 2:30 AM, Luigi Carbone<lg.carbone at gmail.com>  wrote:
>> In /etc/sane.d/.dll.conf "canon_dr" is listed,
>>
>> The result of command SANE_DEBUG_DLL=255 scanimage -L 2>9050.log on terminal
>> is
>>
>> sudo SANE_DEBUG_DLL=255 scanimage -L 2>  9050.log
>> [sanei_debug] Setting debug level of dll to 255.
>> [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.21
>> [dll] sane_init/read_dlld: processing /usr/local/etc/sane.d/dll.d ...
>> [dll] sane_init/read_dlld: done.
>> [dll] sane_init/read_config: Couldn't open config file (dll.conf): No such
>> file or directory
>> [dll] sane_get_devices
>> [dll] sane_get_devices: found 0 devices
>> [dll] sane_exit: exiting
>> [dll] sane_exit: finished
>>
>> but the 9050.log is attach.
>>
>> TKS
>>
>> Il 19/11/2010 14:26, m. allan noah ha scritto:
>>>
>>> The canon_dr backend is not enabled. check /etc/sane.d/dll.conf, and
>>> make sure 'canon_dr' is listed there.
>>>
>>> If it is listed, then try this:
>>>
>>> SANE_DEBUG_DLL=255 scanimage -L 2>9050.log
>>>
>>> and send that log.
>>>
>>> allan
>>>
>>> On Fri, Nov 19, 2010 at 7:56 AM, Luigi Carbone<lg.carbone at gmail.com>
>>>   wrote:
>>>>
>>>> Mmh, it's same.
>>>>
>>>> The log file is attach.
>>>>
>>>> Luigi
>>>>
>>>> Il 19/11/2010 13:33, m. allan noah ha scritto:
>>>>>
>>>>> Ok- as root, run this:
>>>>>
>>>>> SANE_DEBUG_CANON_DR=30 scanimage -L 2>9050.log
>>>>>
>>>>> then send 9050.log to the list.
>>>>>
>>>>> allan
>>>>>
>>>>> On Fri, Nov 19, 2010 at 2:03 AM, Luigi Carbone<lg.carbone at gmail.com>
>>>>>   wrote:
>>>>>>
>>>>>> With a privileges root, this is the result
>>>>>>
>>>>>> No scanners were identified. If you were expecting something different,
>>>>>> check that the scanner is plugged in, turned on and detected by the
>>>>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>>>>> which came with this software (README, FAQ, manpages).
>>>>>>
>>>>>> :(
>>>>>>
>>>>>> Il 18/11/2010 14:20, m. allan noah ha scritto:
>>>>>>>
>>>>>>> as root, run the following command, and send output to us:
>>>>>>>
>>>>>>> scanimage -L
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>> On Thu, Nov 18, 2010 at 7:57 AM, Luigi Carbone<lg.carbone at gmail.com>
>>>>>>>   wrote:
>>>>>>>>
>>>>>>>> Hi all,
>>>>>>>> I have problem with scanner canon dr-9050C, i have ubuntu 10.04 and
>>>>>>>> installated driver san version 1.0.21.
>>>>>>>>
>>>>>>>> I have configured file canon_dr.conf so
>>>>>>>> # DR-9050C
>>>>>>>> usb 0x1083 0x1622
>>>>>>>>
>>>>>>>> the command lsusb returns
>>>>>>>>
>>>>>>>> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>>> Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless
>>>>>>>> Mouse+Keyboard
>>>>>>>> Receiver
>>>>>>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>>>>> Bus 001 Device 004: ID 152e:2507 LG (HLDS)
>>>>>>>> Bus 001 Device 003: ID 1083:1622 Canon Electronics, Inc.
>>>>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>>>>>
>>>>>>>> the scanner is visible to the system...
>>>>>>>>
>>>>>>>> Help me.
>>>>>>>> --
>>>>>>
>>>>



-- 
Luigi Carbone
----------------------
Owner @ http://www.ingenioweb.it
Web Designer @ www.consulenti-ict.it
CV: http://www.linkedin.com/in/carboneluigi
Skype: corsaro832
Cell: 340 32 15 783

More information about the sane-devel mailing list