[sane-devel] trying Canon DR-3080C

[D. Hugh Redelmeier]

| From: m. allan noah <kitno455 at gmail.com>

Thanks for the quick reply!

| Are you sure that the canon_dr backend is getting loaded?
| 
| SANE_DEBUG_CANON_DR=15 scanimage -L
| 
| if you dont see any canon_dr debug output, then make sure it is listed
| in your dll.conf file, usually in /etc/sane.d

/etc/sane.d/dll.conf has: canon_dr.
/etc/same.d/canon_dr.conf has: scsi CANON DR

Here's what I got when I ran "SANE_DEBUG_CANON_DR=15 scanimage -L".
It looks to me as if the driver is there.  I cannot see if it is doing
much.

    $ SANE_DEBUG_CANON_DR=15 scanimage -L
    [sanei_debug] Setting debug level of canon_dr to 15.
    [canon_dr] sane_init: start
    [canon_dr] sane_init: canon_dr backend 1.0.26, from sane-backends 1.0.20
    [canon_dr] sane_init: finish
    [canon_dr] sane_get_devices: start
    [canon_dr] sane_get_devices: reading config file canon_dr.conf
    [canon_dr] sane_get_devices: looking for 'scsi CANON CR'
    [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
    [canon_dr] sane_get_devices: setting "vendor-name" to CANON
    [canon_dr] sane_get_devices: setting "model-name" to DR-2080C
    [canon_dr] sane_get_devices: setting "version-name" to XXXX
    [canon_dr] sane_get_devices: setting "padded-read" to 1
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1601'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1602'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1603'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1604'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1606'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1607'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1608'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1609'
    [canon_dr] sane_get_devices: setting "vendor-name" to CANON
    [canon_dr] sane_get_devices: setting "model-name" to DR-2050C
    [canon_dr] sane_get_devices: setting "version-name" to XXXX
    [canon_dr] sane_get_devices: setting "padded-read" to 1
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160a'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160b'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160c'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160f'
    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x2222'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1614'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1617'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1618'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161a'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161b'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161d'
    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1620'
    [canon_dr] sane_get_devices: found 0 scanner(s)
    [canon_dr] sane_get_devices: finish
    device `v4l:/dev/video0' is a Noname Hauppauge HVR-1600 virtual device
    [canon_dr] sane_exit: start
    [canon_dr] sane_exit: finish
    hugh at redace:~$