[sane-devel] trying Canon DR-3080C

[m. allan noah]

Can you do that command as root? If it does not show as root, then we
need more info (also as root)

SANE_DEBUG_SANEI_SCSI=255 SANE_DEBUG_CANON_DR=15 scanimage -L

allan

On Sun, Feb 28, 2010 at 1:12 PM, D. Hugh Redelmeier <hugh at mimosa.com> wrote:
> | From: m. allan noah <kitno455 at gmail.com>
>
> Thanks for the quick reply!
>
> | Are you sure that the canon_dr backend is getting loaded?
> |
> | SANE_DEBUG_CANON_DR=15 scanimage -L
> |
> | if you dont see any canon_dr debug output, then make sure it is listed
> | in your dll.conf file, usually in /etc/sane.d
>
> /etc/sane.d/dll.conf has: canon_dr.
> /etc/same.d/canon_dr.conf has: scsi CANON DR
>
> Here's what I got when I ran "SANE_DEBUG_CANON_DR=15 scanimage -L".
> It looks to me as if the driver is there.  I cannot see if it is doing
> much.
>
>    $ SANE_DEBUG_CANON_DR=15 scanimage -L
>    [sanei_debug] Setting debug level of canon_dr to 15.
>    [canon_dr] sane_init: start
>    [canon_dr] sane_init: canon_dr backend 1.0.26, from sane-backends 1.0.20
>    [canon_dr] sane_init: finish
>    [canon_dr] sane_get_devices: start
>    [canon_dr] sane_get_devices: reading config file canon_dr.conf
>    [canon_dr] sane_get_devices: looking for 'scsi CANON CR'
>    [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>    [canon_dr] sane_get_devices: setting "vendor-name" to CANON
>    [canon_dr] sane_get_devices: setting "model-name" to DR-2080C
>    [canon_dr] sane_get_devices: setting "version-name" to XXXX
>    [canon_dr] sane_get_devices: setting "padded-read" to 1
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1601'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1602'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1603'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1604'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1606'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1607'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1608'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1609'
>    [canon_dr] sane_get_devices: setting "vendor-name" to CANON
>    [canon_dr] sane_get_devices: setting "model-name" to DR-2050C
>    [canon_dr] sane_get_devices: setting "version-name" to XXXX
>    [canon_dr] sane_get_devices: setting "padded-read" to 1
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160a'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160b'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160c'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160f'
>    [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x2222'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1614'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1617'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1618'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161a'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161b'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161d'
>    [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1620'
>    [canon_dr] sane_get_devices: found 0 scanner(s)
>    [canon_dr] sane_get_devices: finish
>    device `v4l:/dev/video0' is a Noname Hauppauge HVR-1600 virtual device
>    [canon_dr] sane_exit: start
>    [canon_dr] sane_exit: finish
>    hugh at redace:~$
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"