[sane-devel] Xerox Travel Scanner 100 could not be detected

[Andrey Loginov]

У пт, 2010-01-29 у 10:43 +0100, stef пише:
> Le jeudi 28 janvier 2010 11:34:55 Andrey Loginov, vous avez écrit :
> > Hello
> > Please check changed genesys_device.c in attachment. And also the scan
> > with scan area changed.
> > And there are some other staff to do (like scan button and page feed
> > sensor). How can we proceed with this staff?
Most probably I'va attached original file.
Please check attached file again. 
There is a section anamed xerox_travelscanner_model.

> > 
> > У чт, 2010-01-28 у 05:45 +0100, stef пише:
> > > Le mercredi 27 janvier 2010 07:17:21 Andrey Loginov, vous avez écrit :
> > > > As of previosu message currently I have successful calibration using
> > > > xsane.
> > > > I will also try to play with motors and other staff to make it better.
> > > >
> > > > У
> > >
> > > 	Hello,
> > >
> > > 	nice to see it working. From the picture you sent, I think you may have
> > > to adjust left margin by adjusting the X start offset. You'll have to
> > > modify this line in the device structure:
> > >
> > > SANE_FIX ( 4.00),		/* Start of scan area in mm  (x) */
> > >
> > > 	I'd gladly accept and apply patch for your scanner model.
> > >
> > > Regards,
> > > 	Stef
> > 
> 	Hello,
> 
> 	the picture shows that the scanner works great. This is nice. For button 
> support, it may already work. Check that in the sensor flags there is a scan 
> button flag and a document loaded flag.
> 	I can't find any xerox entry in the appended file. When I compare it with 
> master branch, I don't see any other change than the addition of the Visioneer 
> 7100. Did I missed something ?
> 
> Regards,
> 	Stef

-------------- next part --------------
A non-text attachment was scrubbed...
Name: genesys_devices.c
Type: text/x-csrc
Size: 56198 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20100129/5930e80f/attachment-0001.c>