[sane-devel] Canon PIXMA MX870

[Matthias Pannek]

Hello,

i'm a owner of a PIXMA MX870 and it would be really nice to have Sane
support for this scanner :-(

The MX870 should be a slightly modified MX860 (who is supported right
now).

I'm not sure about the bjnp-Protocol, because there is no TCP port 8612
open on this device. But the devices uses UDP 8612 for communication.

Host is up (0.00045s latency).
Not shown: 131060 closed ports
PORT     STATE         SERVICE
80/tcp   open          http
139/tcp  open          netbios-ssn
137/udp  open          netbios-ns
138/udp  open|filtered netbios-dgm
500/udp  open|filtered isakmp
3702/udp open|filtered unknown
5353/udp open          zeroconf
8611/udp open          unknown
8612/udp open          unknown
8613/udp open          unknown
MAC Address: 00:1E:8F:99:BD:xx (Canon)

Here a tcpdump of a Preview-scan using Windows in a VM:
http://files.pannek.de/log.txt

Here a tcpdump after the start of xsane:
http://files.pannek.de/xsane.txt

There is communication between sane and my scanner.

This is the "Printer Identiy":
%"E at zr
e
!BmBJNP0UUMFG:Canon;CMD:MultiPass 2.1,IVEC;MDL:MX870
series;CLS:IMAGE;DES:Canon MX870 series;

Thank you,
    Matthias