[sane-devel] Canon PIXMA MX870

[Nicolas Martin]

Ok, so ready for a test ?

Let's assume MX870 is a somehow a MX860, and uses the generation 4 Pixma
protocol.

First, download the latest Sane git version. You should get a
sane-backends folder.

Then, replace the file sane-backends/backend/pixma_mp150.c with the one
I've attached. I've just added a declaration for the MX870 in there.

./configure with the correct options, make, install.
Help here for that:
http://mp610.blogspot.com/2008/04/give-your-scanner-new-freshly-sane.html


Then give a try. Be careful if you have a webcam attached, it may mess
up the detection and better disable in this case the v4l backend
in /etc/sane.d/dll.conf

Use the following commands to get logs:

$ export SANE_DEBUG_SANEI_USB=255
$ export SANE_DEBUG=255
$ export SANE_DEBUG_PIXMA=11

$ scanimage -L  2> scanimage1.log 


$ scanimage -T  2> scanimage2.log 

Zip send back the result of scanimage.log to check how it's going.

Nicolas


Le vendredi 16 juillet 2010 à 09:24 +0200, Matthias Pannek a écrit :
> Hello,
> 
> i'm a owner of a PIXMA MX870 and it would be really nice to have Sane
> support for this scanner :-(
> 
> The MX870 should be a slightly modified MX860 (who is supported right
> now).
> 
> I'm not sure about the bjnp-Protocol, because there is no TCP port 8612
> open on this device. But the devices uses UDP 8612 for communication.
> 
> Host is up (0.00045s latency).
> Not shown: 131060 closed ports
> PORT     STATE         SERVICE
> 80/tcp   open          http
> 139/tcp  open          netbios-ssn
> 137/udp  open          netbios-ns
> 138/udp  open|filtered netbios-dgm
> 500/udp  open|filtered isakmp
> 3702/udp open|filtered unknown
> 5353/udp open          zeroconf
> 8611/udp open          unknown
> 8612/udp open          unknown
> 8613/udp open          unknown
> MAC Address: 00:1E:8F:99:BD:xx (Canon)
> 
> Here a tcpdump of a Preview-scan using Windows in a VM:
> http://files.pannek.de/log.txt
> 
> Here a tcpdump after the start of xsane:
> http://files.pannek.de/xsane.txt
> 
> There is communication between sane and my scanner.
> 
> This is the "Printer Identiy":
> %"E at zr
> e
> !BmBJNP0UUMFG:Canon;CMD:MultiPass 2.1,IVEC;MDL:MX870
> series;CLS:IMAGE;DES:Canon MX870 series;
> 
> Thank you,
>     Matthias
> 
> 
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org

-------------- next part --------------
A non-text attachment was scrubbed...
Name: pixma_mp150.c
Type: text/x-csrc
Size: 49567 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20100716/58632411/attachment-0001.c>