[sane-devel] Canon DR-2580C

[m. allan noah]

Sorry for the trouble- This unit was very well tested during the
development of the driver, so it should work.

There have been quite a number of changes since sane-backends 1.0.20
came out, so my first suggestion would be to upgrade to 1.0.21. See if
you can find a package for that. If not, it is easy to compile from
source. Let us know if you want pointers.

allan

On Mon, Jun 14, 2010 at 12:20 PM, J F <jqford at hotmail.com> wrote:
> Hello-
>
> SANE newbie question:  Recently installed Ubuntu 10.04 and want to use my
> Canon DR-2580C.  I've tried the Simple Scan front end - but that interface
> just says "failed to scan" - although it recognizes that I have a DR-2580C.
>
> I tried running SANE from the terminal, and get the following (I've omitted
> a couple lines, indicated by ellipsis).
>
> Any suggestions are greatly appreciated.
>
> user at xxxx:~$ sane-find-scanner
> ...
> found USB scanner (vendor=0x04a9, product=0x1608) at libusb:001:010
>
> user at xxxx:~$ scanimage -L
> device `canon_dr:libusb:001:010' is a CANON DR-2580C scanner
>
> user at xxxx:~$ scanimage -T
> scanimage: sane_start: Invalid argument
> user at xxxx:~$ SANE_DEBUG_CANON_DR=255 scanimage -T 2>error.log
>
> Here are the results of error.log from running 'scanimage -T':
>
> [sanei_debug] Setting debug level of canon_dr to 255.
> [canon_dr] sane_init: start
> [canon_dr] sane_init: canon_dr backend 1.0.26, from sane-backends 1.0.20
> [canon_dr] sane_init: finish
> [canon_dr] sane_get_devices: start
> [canon_dr] sane_get_devices: reading config file canon_dr.conf
> [canon_dr] sane_get_devices: looking for 'scsi CANON CR'
> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
> [canon_dr] sane_get_devices: setting "vendor-name" to CANON
> [canon_dr] sane_get_devices: setting "model-name" to DR-2080C
> [canon_dr] sane_get_devices: setting "version-name" to XXXX
> [canon_dr] sane_get_devices: setting "padded-read" to 1
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1601'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1602'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1603'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1604'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1606'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1607'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1608'
> [canon_dr] attach_one: start
> [canon_dr] attach_one: looking for 'libusb:001:010'
> [canon_dr] connect_fd: start
> [canon_dr] connect_fd: opening USB device
> [canon_dr] wait_scanner: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] wait_scanner: finish
> [canon_dr] connect_fd: finish
> [canon_dr] init_inquire: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 12 00 00 00
> ................
> [canon_dr] 010: 30 00 00 00 00 00 00 00
> 0.......
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] in: reading 48 bytes, timeout 30000
> [canon_dr] in: read 48 bytes, retval 0
> [canon_dr] in: <<
> [canon_dr] 000: 06 00 02 02 3b 00 00 10 43 41 4e 4f 4e 20 20 20
> ....;...CANON
> [canon_dr] 010: 44 52 2d 32 35 38 30 43 20 20 20 20 20 20 20 20
> DR-2580C
> [canon_dr] 020: 32 2e 30 38 00 00 00 00 32 30 30 36 31 30 30 33
> 2.08....20061003
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] init_inquire: Found CANON scanner DR-2580C version 2.08 at
> libusb:001:010
> [canon_dr] init_inquire: finish
> [canon_dr] init_vpd: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 12 01 f0 00
> ................
> [canon_dr] 010: 1e 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] in: reading 30 bytes, timeout 30000
> [canon_dr] in: read 30 bytes, retval 0
> [canon_dr] in: <<
> [canon_dr] 000: 06 f0 02 00 2b 02 58 02 58 00 02 58 02 58 00 64
> ....+.X.X..X.X.d
> [canon_dr] 010: 00 64 29 d4 00 00 13 f0 00 00 20 d0 fe 00       .d).......
> ...
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] init_vpd: length=2b
> [canon_dr] standard options
> [canon_dr]   basic x res: 600 dpi
> [canon_dr]   basic y res: 600 dpi
> [canon_dr]   step x res: 0 dpi
> [canon_dr]   step y res: 0 dpi
> [canon_dr]   max x res: 600 dpi
> [canon_dr]   max y res: 600 dpi
> [canon_dr]   min x res: 100 dpi
> [canon_dr]   min y res: 100 dpi
> [canon_dr]   60 dpi: 0
> [canon_dr]   75 dpi: 0
> [canon_dr]   100 dpi: 1
> [canon_dr]   120 dpi: 0
> [canon_dr]   150 dpi: 1
> [canon_dr]   160 dpi: 0
> [canon_dr]   180 dpi: 0
> [canon_dr]   200 dpi: 1
> [canon_dr]   240 dpi: 1
> [canon_dr]   300 dpi: 1
> [canon_dr]   320 dpi: 0
> [canon_dr]   400 dpi: 1
> [canon_dr]   480 dpi: 0
> [canon_dr]   600 dpi: 1
> [canon_dr]   800 dpi: 0
> [canon_dr]   1200 dpi: 0
> [canon_dr]   max width: 8.51 inches
> [canon_dr]   max length: 14.00 inches
> [canon_dr]   AWD: 1
> [canon_dr]   CE Emphasis: 1
> [canon_dr]   C Emphasis: 1
> [canon_dr]   High quality: 1
> [canon_dr]   grayscale: 1
> [canon_dr]   halftone: 1
> [canon_dr]   monochrome: 1
> [canon_dr]   overflow: 0
> [canon_dr] init_vpd: finish
> [canon_dr] init_model: start
> [canon_dr] init_model: finish
> [canon_dr] init_panel: start
> [canon_dr] read_panel: start
> [canon_dr] read_panel: running
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 28 00 84 00
> ............(...
> [canon_dr] 010: 00 00 00 00 08 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] in: reading 8 bytes, timeout 30000
> [canon_dr] in: read 8 bytes, retval 0
> [canon_dr] in: <<
> [canon_dr] 000: 00 00 01 00 00 00 00 00
> ........
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] read_panel: finish
> [canon_dr] send_panel: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 2a 00 84 00
> ............*...
> [canon_dr] 010: 00 00 00 00 08 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] out: writing 20 bytes, timeout 30000
> [canon_dr] out: >>
> [canon_dr] 000: 00 00 00 10 00 02 b0 00 00 00 00 00 00 00 01 00
> ................
> [canon_dr] 010: 00 00 00 00
> ....
> [canon_dr] out: wrote 20 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] send_panel: finish 0
> [canon_dr] init_panel: finish
> [canon_dr] init_user: start
> [canon_dr] init_user: finish
> [canon_dr] init_options: start
> [canon_dr] init_options: finish
> [canon_dr] disconnect_fd: start
> [canon_dr] disconnecting usb device
> [canon_dr] disconnect_fd: finish
> [canon_dr] attach_one: finish
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1609'
> [canon_dr] sane_get_devices: setting "vendor-name" to CANON
> [canon_dr] sane_get_devices: setting "model-name" to DR-2050C
> [canon_dr] sane_get_devices: setting "version-name" to XXXX
> [canon_dr] sane_get_devices: setting "padded-read" to 1
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160a'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160b'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160c'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160f'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x2222'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1614'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1617'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1618'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161a'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161b'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161d'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1620'
> [canon_dr] sane_get_devices: found scanner libusb:001:010
> [canon_dr] sane_get_devices: found 1 scanner(s)
> [canon_dr] sane_get_devices: finish
> [canon_dr] sane_open: start
> [canon_dr] sane_open: searching currently attached scanners
> [canon_dr] sane_open: device libusb:001:010 requested
> [canon_dr] sane_open: device libusb:001:010 found
> [canon_dr] connect_fd: start
> [canon_dr] connect_fd: opening USB device
> [canon_dr] wait_scanner: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] wait_scanner: finish
> [canon_dr] connect_fd: finish
> [canon_dr] sane_open: finish
> [canon_dr] sane_get_option_descriptor: 0
> [canon_dr] sane_control_option: get value for '' (0)
> [canon_dr] sane_get_option_descriptor: 0
> [canon_dr] sane_control_option: get value for '' (0)
> [canon_dr] sane_get_option_descriptor: 1
> [canon_dr] sane_get_option_descriptor: 2
> [canon_dr] sane_get_option_descriptor: 3
> [canon_dr] sane_get_option_descriptor: 4
> [canon_dr] sane_get_option_descriptor: 5
> [canon_dr] sane_get_option_descriptor: 6
> [canon_dr] sane_get_option_descriptor: 7
> [canon_dr] sane_get_option_descriptor: 8
> [canon_dr] sane_get_option_descriptor: 9
> [canon_dr] sane_get_option_descriptor: 10
> [canon_dr] sane_get_option_descriptor: 11
> [canon_dr] sane_get_option_descriptor: 12
> [canon_dr] sane_get_option_descriptor: 13
> [canon_dr] sane_get_option_descriptor: 14
> [canon_dr] sane_get_option_descriptor: 15
> [canon_dr] sane_get_option_descriptor: 16
> [canon_dr] sane_get_option_descriptor: 17
> [canon_dr] sane_get_option_descriptor: 18
> [canon_dr] sane_get_option_descriptor: 19
> [canon_dr] sane_get_option_descriptor: 20
> [canon_dr] sane_get_option_descriptor: 21
> [canon_dr] sane_get_option_descriptor: 22
> [canon_dr] sane_get_option_descriptor: 23
> [canon_dr] sane_get_option_descriptor: 24
> [canon_dr] sane_get_option_descriptor: 25
> [canon_dr] sane_get_option_descriptor: 26
> [canon_dr] sane_get_option_descriptor: 27
> [canon_dr] sane_get_option_descriptor: 28
> [canon_dr] sane_get_option_descriptor: 29
> [canon_dr] sane_get_option_descriptor: 30
> [canon_dr] sane_get_option_descriptor: 31
> [canon_dr] sane_get_option_descriptor: 32
> [canon_dr] sane_get_option_descriptor: 33
> [canon_dr] sane_get_option_descriptor: 34
> [canon_dr] sane_control_option: get value for 'br-x' (9)
> [canon_dr] sane_control_option: get value for 'tl-x' (7)
> [canon_dr] sane_control_option: get value for 'br-y' (10)
> [canon_dr] sane_control_option: get value for 'tl-y' (8)
> [canon_dr] sane_control_option: get value for 'tl-x' (7)
> [canon_dr] sane_get_option_descriptor: 9
> [canon_dr] sane_control_option: set value for 'br-x' (9)
> [canon_dr] sane_control_option: get value for 'tl-y' (8)
> [canon_dr] sane_get_option_descriptor: 10
> [canon_dr] sane_control_option: set value for 'br-y' (10)
> [canon_dr] sane_start: start
> [canon_dr] started=0, side=0, source=1
> [canon_dr] sane_get_parameters: start
> [canon_dr] sane_get_parameters: not started, updating
> [canon_dr] sane_get_parameters: x: max=10208, page=10200, gpw=10200, res=600
> [canon_dr] sane_get_parameters: y: max=16800, page=13200, gph=13200, res=600
> [canon_dr] sane_get_parameters: area: tlx=0, brx=10200, tly=0, bry=13200
> [canon_dr] sane_get_parameters: params: ppl=5096, Bpl=637, lines=6600
> [canon_dr] sane_get_parameters: params: format=0, depth=1, last=1
> [canon_dr] sane_get_parameters: finish
> [canon_dr] object_position: start
> [canon_dr] object_position: eject
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 31 00 00 00
> ............1...
> [canon_dr] 010: 00 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] wait_scanner: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] wait_scanner: finish
> [canon_dr] object_position: finish
> [canon_dr] set_window: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 24 00 00 00
> ............$...
> [canon_dr] 010: 00 00 00 00 34 00 00 00
> ....4...
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] out: writing 64 bytes, timeout 30000
> [canon_dr] out: >>
> [canon_dr] 000: 00 00 00 3c 00 02 b0 00 00 00 00 00 00 00 00 00
> ...<............
> [canon_dr] 010: 00 00 00 2c 00 00 02 58 02 58 00 00 00 04 ff ff
> ...,...X.X......
> [canon_dr] 020: ff ff 00 00 27 d0 00 00 33 90 80 80 80 00 01 00
> ....'...3.......
> [canon_dr] 030: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] out: wrote 64 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 0 bytes, retval 5
> [canon_dr] stat: <<
> [canon_dr]
> [canon_dr] stat: clearing error 'End of file reached'
> [canon_dr] do_usb_clear: start
> [canon_dr] rs sub call >>
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 03 00 00 00
> ................
> [canon_dr] 010: 0e 00 00 00 00 00 00 00
> ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] in: reading 14 bytes, timeout 30000
> [canon_dr] in: read 14 bytes, retval 0
> [canon_dr] in: <<
> [canon_dr] 000: f0 00 05 00 00 00 00 06 00 00 00 00 26 00
> ............&.
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00
> ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] rs sub call <<
> [canon_dr] sense_handler: start
> [canon_dr] Sense=0x5, ASC=0x26, ASCQ=00, EOM=0, ILI=0, info=00000000
> [canon_dr] Illegal request: invalid field in parm list
> [canon_dr] do_usb_clear: finish after RS
> [canon_dr] stat: bad RS status, 4
> [canon_dr] set_window: finish
> [canon_dr] sane_start: ERROR: cannot set window
> scanimage: sane_start: Invalid argument
> [canon_dr] sane_cancel: start
> [canon_dr] sane_cancel: finish
> [canon_dr] sane_close: start
> [canon_dr] disconnect_fd: start
> [canon_dr] disconnecting usb device
> [canon_dr] disconnect_fd: finish
> [canon_dr] sane_close: finish
> [canon_dr] sane_exit: start
> [canon_dr] disconnect_fd: start
> [canon_dr] disconnect_fd: finish
> [canon_dr] sane_exit: finish
>
>
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"