[sane-devel] Canon DR-2580C
m. allan noah
kitno455 at gmail.com
Mon Jun 14 16:51:12 UTC 2010
And on further inspection, this machine did not get 'complete' support
until 1.0.21, so an upgrade is definitely in order.
allan
On Mon, Jun 14, 2010 at 12:44 PM, m. allan noah <kitno455 at gmail.com> wrote:
> Sorry for the trouble- This unit was very well tested during the
> development of the driver, so it should work.
>
> There have been quite a number of changes since sane-backends 1.0.20
> came out, so my first suggestion would be to upgrade to 1.0.21. See if
> you can find a package for that. If not, it is easy to compile from
> source. Let us know if you want pointers.
>
> allan
>
> On Mon, Jun 14, 2010 at 12:20 PM, J F <jqford at hotmail.com> wrote:
>> Hello-
>>
>> SANE newbie question: Recently installed Ubuntu 10.04 and want to use my
>> Canon DR-2580C. I've tried the Simple Scan front end - but that interface
>> just says "failed to scan" - although it recognizes that I have a DR-2580C.
>>
>> I tried running SANE from the terminal, and get the following (I've omitted
>> a couple lines, indicated by ellipsis).
>>
>> Any suggestions are greatly appreciated.
>>
>> user at xxxx:~$ sane-find-scanner
>> ...
>> found USB scanner (vendor=0x04a9, product=0x1608) at libusb:001:010
>>
>> user at xxxx:~$ scanimage -L
>> device `canon_dr:libusb:001:010' is a CANON DR-2580C scanner
>>
>> user at xxxx:~$ scanimage -T
>> scanimage: sane_start: Invalid argument
>> user at xxxx:~$ SANE_DEBUG_CANON_DR=255 scanimage -T 2>error.log
>>
>> Here are the results of error.log from running 'scanimage -T':
>>
>> [sanei_debug] Setting debug level of canon_dr to 255.
>> [canon_dr] sane_init: start
>> [canon_dr] sane_init: canon_dr backend 1.0.26, from sane-backends 1.0.20
>> [canon_dr] sane_init: finish
>> [canon_dr] sane_get_devices: start
>> [canon_dr] sane_get_devices: reading config file canon_dr.conf
>> [canon_dr] sane_get_devices: looking for 'scsi CANON CR'
>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>> [canon_dr] sane_get_devices: setting "vendor-name" to CANON
>> [canon_dr] sane_get_devices: setting "model-name" to DR-2080C
>> [canon_dr] sane_get_devices: setting "version-name" to XXXX
>> [canon_dr] sane_get_devices: setting "padded-read" to 1
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1601'
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1602'
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1603'
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1604'
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1606'
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1607'
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1608'
>> [canon_dr] attach_one: start
>> [canon_dr] attach_one: looking for 'libusb:001:010'
>> [canon_dr] connect_fd: start
>> [canon_dr] connect_fd: opening USB device
>> [canon_dr] wait_scanner: start
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 500
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
>> ................
>> [canon_dr] 010: 00 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 500
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 500
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
>> ................
>> [canon_dr] 010: 00 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 500
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] wait_scanner: finish
>> [canon_dr] connect_fd: finish
>> [canon_dr] init_inquire: start
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 30000
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 12 00 00 00
>> ................
>> [canon_dr] 010: 30 00 00 00 00 00 00 00
>> 0.......
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] in: reading 48 bytes, timeout 30000
>> [canon_dr] in: read 48 bytes, retval 0
>> [canon_dr] in: <<
>> [canon_dr] 000: 06 00 02 02 3b 00 00 10 43 41 4e 4f 4e 20 20 20
>> ....;...CANON
>> [canon_dr] 010: 44 52 2d 32 35 38 30 43 20 20 20 20 20 20 20 20
>> DR-2580C
>> [canon_dr] 020: 32 2e 30 38 00 00 00 00 32 30 30 36 31 30 30 33
>> 2.08....20061003
>> [canon_dr] stat: reading 4 bytes, timeout 30000
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] init_inquire: Found CANON scanner DR-2580C version 2.08 at
>> libusb:001:010
>> [canon_dr] init_inquire: finish
>> [canon_dr] init_vpd: start
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 30000
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 12 01 f0 00
>> ................
>> [canon_dr] 010: 1e 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] in: reading 30 bytes, timeout 30000
>> [canon_dr] in: read 30 bytes, retval 0
>> [canon_dr] in: <<
>> [canon_dr] 000: 06 f0 02 00 2b 02 58 02 58 00 02 58 02 58 00 64
>> ....+.X.X..X.X.d
>> [canon_dr] 010: 00 64 29 d4 00 00 13 f0 00 00 20 d0 fe 00 .d).......
>> ...
>> [canon_dr] stat: reading 4 bytes, timeout 30000
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] init_vpd: length=2b
>> [canon_dr] standard options
>> [canon_dr] basic x res: 600 dpi
>> [canon_dr] basic y res: 600 dpi
>> [canon_dr] step x res: 0 dpi
>> [canon_dr] step y res: 0 dpi
>> [canon_dr] max x res: 600 dpi
>> [canon_dr] max y res: 600 dpi
>> [canon_dr] min x res: 100 dpi
>> [canon_dr] min y res: 100 dpi
>> [canon_dr] 60 dpi: 0
>> [canon_dr] 75 dpi: 0
>> [canon_dr] 100 dpi: 1
>> [canon_dr] 120 dpi: 0
>> [canon_dr] 150 dpi: 1
>> [canon_dr] 160 dpi: 0
>> [canon_dr] 180 dpi: 0
>> [canon_dr] 200 dpi: 1
>> [canon_dr] 240 dpi: 1
>> [canon_dr] 300 dpi: 1
>> [canon_dr] 320 dpi: 0
>> [canon_dr] 400 dpi: 1
>> [canon_dr] 480 dpi: 0
>> [canon_dr] 600 dpi: 1
>> [canon_dr] 800 dpi: 0
>> [canon_dr] 1200 dpi: 0
>> [canon_dr] max width: 8.51 inches
>> [canon_dr] max length: 14.00 inches
>> [canon_dr] AWD: 1
>> [canon_dr] CE Emphasis: 1
>> [canon_dr] C Emphasis: 1
>> [canon_dr] High quality: 1
>> [canon_dr] grayscale: 1
>> [canon_dr] halftone: 1
>> [canon_dr] monochrome: 1
>> [canon_dr] overflow: 0
>> [canon_dr] init_vpd: finish
>> [canon_dr] init_model: start
>> [canon_dr] init_model: finish
>> [canon_dr] init_panel: start
>> [canon_dr] read_panel: start
>> [canon_dr] read_panel: running
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 30000
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 28 00 84 00
>> ............(...
>> [canon_dr] 010: 00 00 00 00 08 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] in: reading 8 bytes, timeout 30000
>> [canon_dr] in: read 8 bytes, retval 0
>> [canon_dr] in: <<
>> [canon_dr] 000: 00 00 01 00 00 00 00 00
>> ........
>> [canon_dr] stat: reading 4 bytes, timeout 30000
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] read_panel: finish
>> [canon_dr] send_panel: start
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 30000
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 2a 00 84 00
>> ............*...
>> [canon_dr] 010: 00 00 00 00 08 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] out: writing 20 bytes, timeout 30000
>> [canon_dr] out: >>
>> [canon_dr] 000: 00 00 00 10 00 02 b0 00 00 00 00 00 00 00 01 00
>> ................
>> [canon_dr] 010: 00 00 00 00
>> ....
>> [canon_dr] out: wrote 20 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 30000
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] send_panel: finish 0
>> [canon_dr] init_panel: finish
>> [canon_dr] init_user: start
>> [canon_dr] init_user: finish
>> [canon_dr] init_options: start
>> [canon_dr] init_options: finish
>> [canon_dr] disconnect_fd: start
>> [canon_dr] disconnecting usb device
>> [canon_dr] disconnect_fd: finish
>> [canon_dr] attach_one: finish
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1609'
>> [canon_dr] sane_get_devices: setting "vendor-name" to CANON
>> [canon_dr] sane_get_devices: setting "model-name" to DR-2050C
>> [canon_dr] sane_get_devices: setting "version-name" to XXXX
>> [canon_dr] sane_get_devices: setting "padded-read" to 1
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160a'
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160b'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160c'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160f'
>> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x2222'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1614'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1617'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1618'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161a'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161b'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161d'
>> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1620'
>> [canon_dr] sane_get_devices: found scanner libusb:001:010
>> [canon_dr] sane_get_devices: found 1 scanner(s)
>> [canon_dr] sane_get_devices: finish
>> [canon_dr] sane_open: start
>> [canon_dr] sane_open: searching currently attached scanners
>> [canon_dr] sane_open: device libusb:001:010 requested
>> [canon_dr] sane_open: device libusb:001:010 found
>> [canon_dr] connect_fd: start
>> [canon_dr] connect_fd: opening USB device
>> [canon_dr] wait_scanner: start
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 500
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
>> ................
>> [canon_dr] 010: 00 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 500
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 500
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
>> ................
>> [canon_dr] 010: 00 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 500
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] wait_scanner: finish
>> [canon_dr] connect_fd: finish
>> [canon_dr] sane_open: finish
>> [canon_dr] sane_get_option_descriptor: 0
>> [canon_dr] sane_control_option: get value for '' (0)
>> [canon_dr] sane_get_option_descriptor: 0
>> [canon_dr] sane_control_option: get value for '' (0)
>> [canon_dr] sane_get_option_descriptor: 1
>> [canon_dr] sane_get_option_descriptor: 2
>> [canon_dr] sane_get_option_descriptor: 3
>> [canon_dr] sane_get_option_descriptor: 4
>> [canon_dr] sane_get_option_descriptor: 5
>> [canon_dr] sane_get_option_descriptor: 6
>> [canon_dr] sane_get_option_descriptor: 7
>> [canon_dr] sane_get_option_descriptor: 8
>> [canon_dr] sane_get_option_descriptor: 9
>> [canon_dr] sane_get_option_descriptor: 10
>> [canon_dr] sane_get_option_descriptor: 11
>> [canon_dr] sane_get_option_descriptor: 12
>> [canon_dr] sane_get_option_descriptor: 13
>> [canon_dr] sane_get_option_descriptor: 14
>> [canon_dr] sane_get_option_descriptor: 15
>> [canon_dr] sane_get_option_descriptor: 16
>> [canon_dr] sane_get_option_descriptor: 17
>> [canon_dr] sane_get_option_descriptor: 18
>> [canon_dr] sane_get_option_descriptor: 19
>> [canon_dr] sane_get_option_descriptor: 20
>> [canon_dr] sane_get_option_descriptor: 21
>> [canon_dr] sane_get_option_descriptor: 22
>> [canon_dr] sane_get_option_descriptor: 23
>> [canon_dr] sane_get_option_descriptor: 24
>> [canon_dr] sane_get_option_descriptor: 25
>> [canon_dr] sane_get_option_descriptor: 26
>> [canon_dr] sane_get_option_descriptor: 27
>> [canon_dr] sane_get_option_descriptor: 28
>> [canon_dr] sane_get_option_descriptor: 29
>> [canon_dr] sane_get_option_descriptor: 30
>> [canon_dr] sane_get_option_descriptor: 31
>> [canon_dr] sane_get_option_descriptor: 32
>> [canon_dr] sane_get_option_descriptor: 33
>> [canon_dr] sane_get_option_descriptor: 34
>> [canon_dr] sane_control_option: get value for 'br-x' (9)
>> [canon_dr] sane_control_option: get value for 'tl-x' (7)
>> [canon_dr] sane_control_option: get value for 'br-y' (10)
>> [canon_dr] sane_control_option: get value for 'tl-y' (8)
>> [canon_dr] sane_control_option: get value for 'tl-x' (7)
>> [canon_dr] sane_get_option_descriptor: 9
>> [canon_dr] sane_control_option: set value for 'br-x' (9)
>> [canon_dr] sane_control_option: get value for 'tl-y' (8)
>> [canon_dr] sane_get_option_descriptor: 10
>> [canon_dr] sane_control_option: set value for 'br-y' (10)
>> [canon_dr] sane_start: start
>> [canon_dr] started=0, side=0, source=1
>> [canon_dr] sane_get_parameters: start
>> [canon_dr] sane_get_parameters: not started, updating
>> [canon_dr] sane_get_parameters: x: max=10208, page=10200, gpw=10200, res=600
>> [canon_dr] sane_get_parameters: y: max=16800, page=13200, gph=13200, res=600
>> [canon_dr] sane_get_parameters: area: tlx=0, brx=10200, tly=0, bry=13200
>> [canon_dr] sane_get_parameters: params: ppl=5096, Bpl=637, lines=6600
>> [canon_dr] sane_get_parameters: params: format=0, depth=1, last=1
>> [canon_dr] sane_get_parameters: finish
>> [canon_dr] object_position: start
>> [canon_dr] object_position: eject
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 30000
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 31 00 00 00
>> ............1...
>> [canon_dr] 010: 00 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 30000
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] wait_scanner: start
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 500
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
>> ................
>> [canon_dr] 010: 00 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 500
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 500
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
>> ................
>> [canon_dr] 010: 00 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 500
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] wait_scanner: finish
>> [canon_dr] object_position: finish
>> [canon_dr] set_window: start
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 30000
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 24 00 00 00
>> ............$...
>> [canon_dr] 010: 00 00 00 00 34 00 00 00
>> ....4...
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] out: writing 64 bytes, timeout 30000
>> [canon_dr] out: >>
>> [canon_dr] 000: 00 00 00 3c 00 02 b0 00 00 00 00 00 00 00 00 00
>> ...<............
>> [canon_dr] 010: 00 00 00 2c 00 00 02 58 02 58 00 00 00 04 ff ff
>> ...,...X.X......
>> [canon_dr] 020: ff ff 00 00 27 d0 00 00 33 90 80 80 80 00 01 00
>> ....'...3.......
>> [canon_dr] 030: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> [canon_dr] out: wrote 64 bytes, retVal 0
>> [canon_dr] stat: reading 4 bytes, timeout 30000
>> [canon_dr] stat: read 0 bytes, retval 5
>> [canon_dr] stat: <<
>> [canon_dr]
>> [canon_dr] stat: clearing error 'End of file reached'
>> [canon_dr] do_usb_clear: start
>> [canon_dr] rs sub call >>
>> [canon_dr] do_usb_cmd: start
>> [canon_dr] cmd: writing 24 bytes, timeout 30000
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 03 00 00 00
>> ................
>> [canon_dr] 010: 0e 00 00 00 00 00 00 00
>> ........
>> [canon_dr] cmd: wrote 24 bytes, retVal 0
>> [canon_dr] in: reading 14 bytes, timeout 30000
>> [canon_dr] in: read 14 bytes, retval 0
>> [canon_dr] in: <<
>> [canon_dr] 000: f0 00 05 00 00 00 00 06 00 00 00 00 26 00
>> ............&.
>> [canon_dr] stat: reading 4 bytes, timeout 30000
>> [canon_dr] stat: read 4 bytes, retval 0
>> [canon_dr] stat: <<
>> [canon_dr] 000: 00 00 00 00
>> ....
>> [canon_dr] do_usb_cmd: finish
>> [canon_dr] rs sub call <<
>> [canon_dr] sense_handler: start
>> [canon_dr] Sense=0x5, ASC=0x26, ASCQ=00, EOM=0, ILI=0, info=00000000
>> [canon_dr] Illegal request: invalid field in parm list
>> [canon_dr] do_usb_clear: finish after RS
>> [canon_dr] stat: bad RS status, 4
>> [canon_dr] set_window: finish
>> [canon_dr] sane_start: ERROR: cannot set window
>> scanimage: sane_start: Invalid argument
>> [canon_dr] sane_cancel: start
>> [canon_dr] sane_cancel: finish
>> [canon_dr] sane_close: start
>> [canon_dr] disconnect_fd: start
>> [canon_dr] disconnecting usb device
>> [canon_dr] disconnect_fd: finish
>> [canon_dr] sane_close: finish
>> [canon_dr] sane_exit: start
>> [canon_dr] disconnect_fd: start
>> [canon_dr] disconnect_fd: finish
>> [canon_dr] sane_exit: finish
>>
>>
>>
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>> to sane-devel-request at lists.alioth.debian.org
>>
>
>
>
> --
> "The truth is an offense, but not a sin"
>
--
"The truth is an offense, but not a sin"
More information about the sane-devel
mailing list