[sane-devel] Mustek ScanExpress A3 USB 1200 PRO

[Ille]

Le Thu, 25 Mar 2010 16:21:35 +0900,
Gernot Hassenpflug <aikishugyo at gmail.com> a écrit :

> On Thu, Mar 25, 2010 at 3:46 PM, scar <scar at drigon.com> wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA256
> >
> > Gernot Hassenpflug @ 03/24/2010 09:15 PM:
> >> On Thu, Mar 25, 2010 at 1:06 PM, scar <scar at drigon.com> wrote:
> 
> > i tried to set the y_range to 16.0 and reinstalled, but still the
> > light went all the way to the end of the glass and didn't stop (it
> > is accompanied by a grinding sound as well), so i pushed ^C again
> > the moment it got to the end.  the command exits with a
> > "Segmentation fault", too.
> 
> Note there are (at least) 2 places to set this: the y_range and then
> the scanner structure a few lines below that. Maybe change both,
> and/or add debug lines in the code to output what is being used in the
> scan command function(s).
> 
> Regards,
> Gernot
> 

Yes, the problem should be here:
The log shows that the requested scan size is 2490x3480, with a
resolution of 300dpi, that is 8,3"x11,6"
Try with changing the values in the scanner struct.

Regards
Ille