[sane-devel] support for Canon MG8150

[Gernot Hassenpflug]

On Tue, Nov 2, 2010 at 5:29 AM, Louis Lagendijk
<louis at lagendijk.xs4all.nl> wrote:
> On Sun, 2010-10-31 at 19:51 +0100,
>> > You can try adding the definitions near the end of pixma_mp150.c where
>> > similar definitions exist, like this:
>> >
>> >   /* Latest devices (2010) Generation 4 CIS/CCD */
>> >   DEVICE ("Canon PIXMA MP280",  "MP280",  MP280_PID,  1200, 638, 877,
>> > PIXMA_CAP_CIS),
>> >   DEVICE ("Canon PIXMA MG5100", "MG5100", MG5100_PID, 1200, 638, 877,
>> > PIXMA_CAP_CIS),
>> >   DEVICE ("Canon PIXMA MG6100", "MG6100", MG6100_PID, 2400, 638, 877,
>> > PIXMA_CAP_CIS),
>> >   DEVICE ("Canon PIXMA MG6200", "MG6200", MG6200_PID, 2400, 638, 877,
>> > PIXMA_CAP_CIS),
>> >   DEVICE ("Canon PIXMA MG8100", "MG8100", MG8100_PID, 4800, 638, 877,
>> > PIXMA_CAP_CCD | PIXMA_CAP_TPU),
>> >
>> > and the USB ids near the start of the file under the existing ones,
>> > like this:
>> >
>> > #define MP280_PID 0x1746
>> > #define MG5100_PID 0x1748
>> > #define MG5200_PID 0x1749
>> > #define MG6100_PID 0x174a
>> > #define MG8100_PID 0x174b
>> >
>
> Please check the USB-ids, if it is incorrect network scanning will work
> (as long as the device id is unique) as the network code gets the
> device-id from the definition in mp150.c where it does the lookup by the
> name of the device read over the ethernet connection. For USB it works
> the other way round....SO if the the id is incorrect network scanning
> will work, while usb scanning fails
>
> best regards, Louis (author of the BJNP stuff)

Hi, yes, please confirm the USBid, I took the above ones from the
Japanese MG8100 series driver, but do not have the device myself.
Best regards,
Gernot Hassenpflug