[sane-devel] genesys and hp G2410: the size of geometry is incorrect

stef stef.dev at free.fr
Thu Sep 23 03:44:10 UTC 2010

Le Wednesday 22 September 2010 05:11:31 Andrey Afletdinov, vous avez écrit :
> I tested a sane-backends-git20100921.
> Device HP ScanGet G2410
> lspci:
> Bus 006 Device 021: ID 03f0:0a01 Hewlett-Packard ScanJet 2400c
> For A4-size paper, I had to use the options:
> scanimage -y 145
> Thus the device scans as the full size А4.
> If I set parameter -y more than 145, then a scan is attempted with a
> height that exceeds the
>   height of the scan surface.
> As a result: I receive the image compressed on a vertical approximately
> twice.
> How it to correct? I can send a debug logs.
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org

	the HP2400 is not yet fully supported. So the issues you are facing are 


More information about the sane-devel mailing list