[sane-devel] hp scanjet 5590 USB-in-USB command verification failed

[Краснов Андрей]

27.02.2011 17:21, Ilia Sotnikov пишет:
> On Thu, Feb 24, 2011 at 2:16 PM, Краснов Андрей<rednikov at ngs.ru>  wrote:
>> Hello
>> I beg your pardon for my English, because I use an automatic translator.
>>
>> Available HP scanjet 5590
>> FreeBSD 8.2-RELEASE amd64
>> sane-backends-1.0.21_2 installed from fresh ports
>> and follow the instructions
>> http://www.freebsd.org/doc/ru/books/handbook/scanners.html
>> I get the following result:
>>
>> sane-find-scanner -q
>> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1705 [hp
>> scanjet scanner], chip=HP4500C/4570C/5500C/5550C/5590/7650) at
>> libusb:/dev/usb:/dev/ugen7.2
>>
>> The first launch:
>> scanimage -L
>> device `hp5590:libusb:/dev/usb:/dev/ugen7.2' is a HP 5590 Workgroup scanner
>>
>> Subsequent launches:
>> scanimage -L
>> [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification failed:
>> expected 0x0012, got 0x00e8
>>
>> And finally launched:
>>
>> SANE_DEBUG_HP5590=50 scanimage -L
>> sanei_debug] Setting debug level of hp5590 to 50.
>> [hp5590] SANE backed for HP ScanJet 4500C/4570C/5500C/5550C/5590/7650 1.0.5
>> [hp5590] (c) Ilia Sotnikov<hostcc at gmail.com>
>> [hp5590] attach_usb_device: Opening USB device
>> [hp5590] attach_usb_device: USB device opened
>> [hp5590] hp5590_init_scanner
>> [hp5590] hp5590_cmd: USB-in-USB: command : 0012
>> [hp5590] hp5590_control_msg: USB-in-USB: core data: no
>> [hp5590] hp5590_control_msg: USB-in-USB: sending control msg
>> [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control
>> message
>> [hp5590] hp5590_get_ack
>> [hp5590] hp5590_get_ack: USB-in-USB: accepted
>> [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was
>> acknowledged
>> [hp5590] hp5590_get_ack
>> [hp5590] hp5590_get_ack: USB-in-USB: accepted
>> [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested
>> [hp5590] hp5590_control_msg: USB-in-USB: core data: no
>> [hp5590] hp5590_control_msg: USB-in-USB: sending control msg
>> [hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for control
>> message
>> [hp5590] hp5590_get_ack
>> [hp5590] hp5590_get_ack: USB-in-USB: accepted
>> [hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was
>> acknowledged
>> [hp5590] hp5590_get_ack
>> [hp5590] hp5590_get_ack: USB-in-USB: accepted
>> [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 12e8, last
>> command: 00e8, core status: 0012
>> [hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification failed:
>> expected 0x0012, got 0x00e8
>> [hp5590] sane_hp5590_get_devices, local only: 0
>> [hp5590] Found 0 devices
>>
>> No scanners were identified. If you were expecting something different,
>> check that the scanner is plugged in, turned on and detected by the
>> sane-find-scanner tool (if appropriate). Please read the documentation
>> which came with this software (README, FAQ, manpages).
>> [hp5590] sane_hp5590_exit
>>
>> Probably because of these problems the program finds no Scanlite scanning
>> devices and, accordingly, I can not use the scanner. Please help me to run
>> the HP scanjet 5590 fine
>>
> Andrew,
> please add USB debug flags before running 'scanimage', eg:
> SANE_DEBUG_HP5590=255 SANE_DEBUG_SANEI_USB=255 scanimage -L
> and sent the resulting output.
> Please, do that twice - first invocation will suceed (as per your
> report), second - failed.
>
sorry, but it turned out a lot ... So we had to keep here:
http://paste.org.ru/?84tskv