[sane-devel] Can't get ADF to work with HP ScanJet c6270

[m. allan noah]

I never did get my 6xxx scanner to work properly with USB. Can you try scsi?

allan

On Sat, Mar 12, 2011 at 5:33 PM, Jille Timmermans <jille at quis.cx> wrote:
> Hello,
>
> I'm trying to get my scanner to use documents from the ADF. Using the
> 'normal mode' works fine.
> SANE claims it is an C6200C, but it should be 6270A. I guess the C instead
> of the A is the problem.
>
> The problem:
> $ scanadf -v -o testscan
> scanadf: scanning image of size 2550x3507 pixels at 1 bits/pixel
> scanadf: acquiring gray frame
> Scanned document testscan
> [...]
>
> which will try to rescan the image from on the plate forever (I guess).
>
> I tried using --source ADF:
> $ scanadf -v -o testscan --source ADF
> Scanned 0 pages
>
> There are, of course, a few documents in the feeder. The scanner doesn't
> make any sound or other sign that it pretends to do something.
>
> Information:
>
> usb-devices extract:
>>
>> T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
>> D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
>> P:  Vendor=03f0 ProdID=0201 Rev=01.00
>> S:  Manufacturer=Hewlett-Packard
>> S:  Product=HP ScanJet 6200C
>> S:  SerialNumber=SG95R112FMHL
>> C:  #Ifs= 1 Cfg#= 1 Atr=60 MxPwr=0mA
>> I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
>
> $ sane-find-scanner
> [...]
> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0201 [HP
> ScanJet 6200C]) at libusb:004:005
> [...]
>
> $ scanadf -L
> device `hp:libusb:004:005' is a Hewlett-Packard ScanJet 62x0C flatbed
> scanner
> scanimage -L returns the same
>
> With kind regards,
> -- Jille Timmermans
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>            to sane-devel-request at lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"