[sane-devel] brigthness with Canon iDE110

[Felipe de Jesus Garcia Martinez]

I try to use my Canon iDE110 with brigthness parameter but scanimage:
unrecognized option '--brigthness=10' some one know if that is
possible?

root at GSI-000434:/home/val# scanimage --device-name=genesys
--brigthness=10 --format=tiff >otra.tiff
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] sane_open: trying to open `genesys'
[dll] load: searching backend `genesys' in
`/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.63
scanimage: open of device genesys failed: Invalid argument
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: finished
root at GSI-000434:/home/val# scanimage --device-name=genesys
--brigthness=10 --format=tiff >otra.tiff
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] sane_open: trying to open `genesys'
[dll] load: searching backend `genesys' in
`/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.63
[dll] sane_open: open successful
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=0)
[dll] sane_control_option(handle=0x898f1b0,option=0,action=0,value=0xbf895628,info=(nil))
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=0)
[dll] sane_control_option(handle=0x898f1b0,option=0,action=0,value=0xbf895558,info=(nil))
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=1)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=2)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=3)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=4)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=5)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=6)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=7)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=8)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=9)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=10)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=11)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=12)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=13)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=14)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=15)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=16)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=17)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=18)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=19)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=20)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=21)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=22)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=23)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=24)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=25)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=26)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=27)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=28)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=29)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=30)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=31)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=32)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=33)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=34)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=35)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=36)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=37)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=38)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=39)
[dll] sane_get_option_descriptor(handle=0x898f1b0,option=40)
[dll] sane_control_option(handle=0x898f1b0,option=10,action=0,value=0x80533f0,info=(nil))
[dll] sane_control_option(handle=0x898f1b0,option=8,action=0,value=0xbf89555c,info=(nil))
[dll] sane_control_option(handle=0x898f1b0,option=11,action=0,value=0x80533f4,info=(nil))
[dll] sane_control_option(handle=0x898f1b0,option=9,action=0,value=0xbf89555c,info=(nil))
scanimage: unrecognized option '--brigthness=10'
[dll] sane_close(handle=0x898f1b0)
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: finished



Felipe García Martínez